- Effective
- July 9, 1969
- Models
- F-27, F-27A, F-27B, F-27F, F-27G, F-27J, F-27M
- Data sheet
- TCDS7A1
- Registered aircraft
- 1 matched by model
- Product
- Aircraft · Large airplane
- Amendment
- 39-788
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 21 KB | 48cc26ff…68e55a9 | FAA DRS (API key needed) |
On this page
The airworthiness directive
69-13-06 FAIRCHILD-HILLER: Amdt. 39-788. Applies to F-27 Type Airplanes, Serial Nos. 1 through 75, Certificated in all categories.
Compliance required within the next 400 hours' time in service after the effective date of this AD, unless already accomplished.
To reduce working of the wing outer panel fuel access door attach bolts, and to prevent possible cracking of the lower skin radiating from the holes drilled for attaching screws of the nut retainer plate assembly, accomplish the following:
(a) For Serial Nos. 1 through 65 airplanes, comply with Fairchild Hiller Service Bulletin No. 57-4, Revision 2, dated October 31, 1963, or equivalent method, approved by the Chief, Engineering and Manufacturing Branch, FAA, Eastern Region.
(b) For Serial Nos. 1 through 75 airplanes, comply with Fairchild Hiller Service Bulletin 57-5, Revision 1, dated April 21, 1966, or equivalent method, approved by the Chief, Engineering and Manufacturing Branch, FAA, Eastern Region.(c) Upon request with substantiating data submitted through an FAA maintenance inspector, the compliance time specified in this AD may be increased by the Chief, Engineering and Manufacturing Branch, FAA, Eastern Region.
This amendment is effective July 9, 1969.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 1
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.