- Effective
- May 1, 1972
- Models
- D.H.114 Heron Series 2A, D.H.114 Heron Series 2DA, D.H.114 Heron Series 2X
- Data sheet
- TCDSA-816
- Registered aircraft
- 1 matched by model
- Product
- Aircraft · Small/large airplane
- Amendment
- 39-1425
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 22 KB | 8d7afb70…290f5d2 | FAA DRS (API key needed) |
On this page
The airworthiness directive
72-08-03 HAWKER SIDDELEY AVIATION: Amdt. 39-1425. Applies to Hawker Siddeley Model DH-114 "Heron" airplanes.
Compliance is required as indicated.
To detect cracks in the upper arm of the rudder control pedal reversal lever, P/N 4CF.767A, accomplish the following:
(a) Within the next 200 hours' time in service after the effective date of this AD, unless already accomplished within the last 2,200 hours' time in service, and thereafter at intervals not to exceed 2,400 hours' time in service from the last inspection, inspect the upper area of the rudder control pedal reversal lever, P/N 4CF.767A, for cracks using a dye penetrant method in accordance with Hawker Siddeley Technical News Sheet Series: "Heron" 114, No. C.F.15, Issue 1, dated October 19, 1970, or later ARB-approved issue or FAA-approved equivalent. If no cracks are found, visually inspect the upper radiused surface of the upper arm of the rudder control reversal lever for marks or other evidence of mechanicaldamage.
(b) If a crack is found during an inspection required by paragraph (a), before further flight replace the cracked part with a new part of the same part number and continue to inspect in accordance with paragraph (a).
(c) If marks or other evidence of mechanical damage are found during an inspection required by paragraph (a), before further flight smoothly blend out the marks and renew the protective treatment, using a selenious acid treatment, and repaint the part. After refitting the part, continue to inspect in accordance with paragraph (a).
This amendment becomes effective May 1, 1972.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 1
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.