AD 75-24-04

Airworthiness directive · Horizontal Stabilizer Center Section Rear Spar Upper Chord Assembly · Boeing 707-100 Long Body, 707-100B Long Body, 707-100B Short Body and 7 more

Effective
November 24, 1975
Models
707-100 Long Body, 707-100B Long Body, 707-100B Short Body, 707-200, 707-300 Series, 707-300B Series and 4 more
Registered aircraft
6 matched by model
Product
Aircraft · Large airplane
Amendment
39-2425

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

75-24-04 BOEING: Amendment 39-2425. Applies to all 707 and 720 series airplanes certificated in all categories which (1) were delivered after January 28, 1966, including Serial Numbers 18955 and 18979, with more than 12,000 hours time in service on the horizontal stabilizer center section rear spar upper chord assembly or (2) were modified by Boeing Service Bulletin No. 2243, Revisions 1 through 7, with more than 12,000 hours time in service since modified or (3) had the bushings removed for lug bore inspection and corrosion removal, with 12,000 hours or more time in service since the last flanged bushings were installed. Compliance required as indicated. A. Within 100 hours time in service after the effective date of this AD, unless inspected within the last 125 hours time in service, and every 225 hours thereafter, visually inspect the horizontal stabilizer center section upper rear spar for cracks in the outer surface of the right and left hand terminal lugs. The cracks initiate in the bushed holes at the terminal fittings. If cracks are found, replace the horizontal stabilizer center section rear spar upper chord assembly or repair prior to further flight in accordance with B or C below. B. Install a strap in accordance with Boeing Drawing No. 65C15785. This strap must be replaced in accordance with Boeing Drawing No. 65C15785 after 3,000 hours time in service. C. Modify in accordance with Boeing Service Bulletin No. 3243 or in a manner approved by the Chief, Engineering and Manufacturing Branch, FAA Northwest Region. Such modification constitutes terminating action for this airworthiness directive. The manufacturer's specifications and procedures identified and described in this directive are incorporated herein and made a part hereof pursuant to 5 U.S.C. 552(a)(1). All persons affected by this directive, who have not already received these documents from the manufacturer, may obtain copies upon request to Boeing Commercial Airplane Company, P.O. Box 3707, Seattle, Washington 98124. The documents may also be examined at FAA Northwest Region, 9010 East Marginal Way South, Seattle, Washington.

This amendment becomes effective November 24, 1975.

Affected TCDS · 3

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 6

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Boeing6 aircraft
By year built
19681977
Registered aircraft by year built: 2 aircraft
19681
19771

4 with no year recorded

By model

Aircraft