AD 78-25-07

Airworthiness directive · Vertical Fin Attachment Brackets · Cessna A150M and A152

Effective
December 22, 1978
Models
A150M, A152
Data sheet
TCDS3A19
Registered aircraft
128 matched by model
Product
Aircraft · Small airplane
Amendment
39-3371

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

78-25-07 CESSNA: Amendment 39-3371. Applies to Models A150M (Serial Numbers A1500654 through A1500734) and A152 (Serial Numbers A1520735 through A1520833) airplanes.

COMPLIANCE: Required as indicated, unless already accomplished.

To assure necessary structural integrity of the vertical fin attachment to the airplane, in accordance with the instructions contained in Cessna Single Engine Service Letter SE78-62, dated October 13, 1978, or later revisions, within the next 25 hours time-in-service after the effective date of this AD, accomplish the following:

A) Replace the two existing Part Number 0431009-3 vertical fin attach brackets with two new Part Number 0431009-3 attach brackets obtained from Cessna.

B) Return the two brackets removed from each airplane to the Cessna factory for metallurgical examination.

C) Any equivalent method of compliance with this AD must be approved by the Chief, Engineering and Manufacturing Branch, FAA, Central Region.

This amendment becomes effective December 22, 1978.

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 128

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Cessna128 aircraft
By year built
19661982
Registered aircraft by year built: 105 aircraft
19661
19731
197420
197523
197617
197712
197811
197910
19805
19812
19823

23 with no year recorded

By model

Aircraft

See all 128 aircraft