AD 79-09-02

Airworthiness directive · Aileron Control Surfaces Drainage · Cessna 441

Effective
May 7, 1979
Model
441
Data sheet
TCDSA28CE
Registered aircraft
172 matched by model
Product
Aircraft · Small airplane
Amendment
39-3453

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

79-09-02 CESSNA: Amendment 39-3453. Applies to Model 441 (Serial Numbers 441-0001 through 441-0090) airplanes.

COMPLIANCE: Required as indicated, unless already accomplished.

To assure proper drainage of the aileron control surfaces, within the next 100 hours time-in-service after the effective date of this AD, accomplish the following:

A) Incorporate additional drainage of the ailerons by drilling new drain holes in accordance with the instructions provided in Cessna Propjet Service Information Letter PJ 79-3, dated March 5, 1979.

B) Any equivalent method of compliance with this AD must be approved by the Chief, Engineering and Manufacturing Branch, FAA, Central Region.

NOTE: The FAA has determined that there is insufficient justification to require mandatory compliance with the elevator portion of Cessna Service Information Letter PJ 79-3. Therefore, this AD is not applicable to elevator drainage improvements provided by that letter.

This Amendment becomes effective May 7, 1979.

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 172

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Cessna172 aircraft
By year built
19772018
Registered aircraft by year built: 144 aircraft
19775
197821
197917
198028
198130
198213
198315
19843
19856
19864
20051
20181

28 with no year recorded

By model

Aircraft

See all 172 aircraft