AD 86-15-06

86-15-06 AVIONS MARCEL DASSAULT - BREGUET AVIATION: Amendment 39-5363. Applies to AMD Falcon 10 series airplanes, serial numbers 1 thru 196 inclusive, and 198 thru 201 inclusive, certificated in any category. Compliance is required within 60 days after the effective date of this AD. To ensure the proper installation of the rudder servo actuator hydraulic lines, accomplish the following, unless already accomplished:

A. Modify the rudder servo actuator system in accordance with AMD-BA Service Bulletin F10-27-028 (0237), dated June 24, 1983.

B. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Standardization Branch, ANM-113, FAA, Northwest Mountain Region.

C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base for the accomplishment of inspections and/or modifications required by this AD.

All persons affected by this directive, who have not already received the appropriate service bulletin from the manufacturer, may obtain copies upon request to the AMD-BA Representative, c/o F.J.C., Teterboro Airport, Teterboro, New Jersey 07608. This document may be examined at the FAA, Northwest Mountain Region, 17900 Pacific Highway South, Seattle, Washington, or the Seattle Aircraft Certification Office, 9010 East Marginal Way South, Seattle, Washington.

This amendment, 39-5363, becomes effective August 25, 1986.