AD 88-23-03

88-23-03 BELL HELICOPTER TEXTRON, INC. (BHTI): Amendment 39-6249. Final copy of priority letter AD.

Applicability: All BHTI Model 206A, 206B, 206B-1, 206L, 206L-1, and 206L-3 helicopters certificated in any category, with tail rotor yoke assembly, P/N 206-011-819-101, identified with the following serial numbers:

A - 2009 A - 2010 A - 2023 A - 2070 A - 2073 A - 2077 A - 2078 A - 2079 A - 2084 A - 2087 A - 2133 A - 2144 A - 2150 A - 2167 A - 2173 A - 2189 A - 2195 A - 2198 A - 2203 A - 2213 A - 2219 A - 2221 A - 2223 A - 2227 A - 2229 A - 2234 A - 226 A - 2243 A - 2262

Compliance: Required as indicated, unless already accomplished.

To prevent the failure of the tail rotor yoke assembly, loss of the tail rotor blade, and subsequent loss of control of the helicopter, accomplish the following:

(a) Before further flight, inspect the aircraft to determine the part number and serial number of the installed tail rotor yoke assembly. If P/N 206-011-819-101 with a serial number listed above is installed on the helicopter, remove and replace the assembly with an airworthy yoke assembly.

(b) An alternate method of compliance or adjustment of the compliance time, which provides an equivalent level of safety, may be used when approved by the Manager, Rotorcraft Certification Office, Rotorcraft Directorate, Aircraft Certification Service, FAA, Southwest Region.

(c) In accordance with FAR 21.197 and 21.199, flight is permitted to a base where removal and replacement of the affected tail rotor yoke required by this AD may be accomplished.

This amendment (39-6249, AD 88-23-03) becomes effective on July 25, 1989, as to all persons except those persons to whom it was made immediately effective by Priority Letter AD 88-23-03, issued November 15, 1988, which contained this amendment.