- Effective
- December 17, 1990
- Models
- 757-200 Series, 757-200CB Series, 757-200PF Series, 757-300 Series
- Data sheet
- TCDSA2NM
- Registered aircraft
- 270 matched by model
- Product
- Aircraft · Large airplane
- Amendment
- 39-6804
- Docket
- 90-NM-96-AD
Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.
Copies of the files this page was built from, with their SHA-256. Retrieved October 18, 2026.
| File | Size | SHA-256 | Original |
|---|---|---|---|
| FAA DRS HTML | 24 KB | fb47bbfd…7d0f46c | FAA DRS (API key needed) |
On this page
The airworthiness directive
90-24-02 BOEING: Amendment 39-6804. Docket No. 90-NM-96-AD.
Applicability: Model 757 series airplanes, as listed in Boeing Service Bulletin 757-30- 0015, Revision 1, dated January 25, 1990, certificated in any category.
Compliance: Required as indicated, unless previously accomplished.
To detect undersized wiring in the flight compartment number 1 window heat system, accomplish the following:
A. Within 90 days after the effective date of this AD, inspect for the presence of undersized wires in the number 1 window heat system, in accordance with Boeing Service Bulletin 757-30-0015, Revision 2, dated August 2, 1990. If undersized wires are found, prior to further flight, replace with wires of appropriate size, in accordance with Boeing Service Bulletin 757-30-0015, Revision 2, dated August 2, 1990.
B. Within 30 days after detecting any undersized wires, submit a report of findings to the Manager, Manufacturing Inspection District Office, FAA, Northwest Mountain Region, Transport Airplane Directorate, 1601 Lind Avenue S.W., Renton, Washington 98055-4056.
C. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Seattle Aircraft Certification Office (ACO), FAA, Transport Airplane Directorate.
NOTE: The request should be submitted directly to the Manager, Seattle ACO, and a copy sent to the cognizant FAA Principal Inspector (PI). The PI will then forward comments or concurrence to the Seattle ACO.
D. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base in order to comply with the requirements of this AD.
All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Boeing Commercial Airplane Group, P.O. Box 3707, Seattle, Washington 98124. These documents may beexamined at the FAA, Northwest Mountain Region, Transport Airplane Directorate, 1601 Lind Avenue S.W., Renton, Washington 98055-4056.
This amendment (39-6804, AD 90-24-02) becomes effective on December 17, 1990.
Affected TCDS · 1
The type certificate data sheets for the models this AD names, matched by model and maker.
Registered aircraft · 270
Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.
| 1982 | 3 |
|---|---|
| 1983 | 1 |
| 1985 | 2 |
| 1986 | 6 |
| 1987 | 1 |
| 1988 | 2 |
| 1989 | 7 |
| 1990 | 18 |
| 1991 | 22 |
| 1992 | 21 |
| 1993 | 17 |
| 1994 | 19 |
| 1995 | 7 |
| 1996 | 16 |
| 1997 | 15 |
| 1998 | 20 |
| 1999 | 18 |
| 2000 | 17 |
| 2001 | 17 |
| 2002 | 13 |
| 2003 | 9 |
| 2004 | 5 |
14 with no year recorded