AD 90-25-11

Airworthiness directive · In-Flight Spoiler Lockout Mechanism · Boeing DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83) and 2 more

Effective
December 17, 1990
Models
DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), MD-88
Data sheet
TCDSA6WE
Registered aircraft
100 matched by model
Product
Aircraft · Large airplane
Amendment
39-6819
Docket
90-NM-228-AD

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

90-25-11 McDONNELL DOUGLAS: Amendment 39-6819. Docket No. 90-NM-228-AD.

Applicability: Model DC-9-80 series airplanes and Model MD-88 airplanes; Fuselage Numbers 1606, 1620, 1623, 1624, 1626, 1632, 1645, 1656, 1657, 1715, 1716, 1732, 1741, and 1746 through 1786; certificated in any category.

Compliance: Required as indicated, unless previously accomplished.

To prevent loss of spoilers in the speed brake mode and flap/slat control, accomplish the following:

A. Within 30 days after the effective date of this AD, deactivate the in-flight spoiler lockout mechanism, in accordance with McDonnell Douglas Service Bulletin 27-312, dated February 26, 1990.

B. Prior to reactivating the in-flight spoiler lockout mechanism, conduct an inspection of the mounting brackets to determine the type and part number (P/N) of the brackets installed.

1. If mounting brackets, P/N 3962598-1A (stainless steel), are installed no further action is required and the in-flight spoiler lockout mechanism may be reactivated, in a manner approved by the Manager, Los Angeles Aircraft Certification Office (ACO), FAA, Transport Airplane Directorate.

2. If mounting brackets, P/N 3962598-1NC (aluminum), are installed, replace them with P/N 3962598-1A brackets prior to reactivating the in-flight spoiler lockout mechanism.

NOTE: The aluminum bracket has a primer finish. The stainless steel bracket is plated.

C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base in order to comply with the requirements of this AD.

D. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Los Angeles Aircraft Certification Office (ACO), FAA, Transport Airplane Directorate.

NOTE: The request should be submitted directly to the Manager, Los Angeles ACO, and a copy sent to the cognizant FAA Principal Inspector (PI). The PI will then forward comments or concurrence to the Los Angeles ACO.

All persons affected by this directive who have not already received the appropriate service information from the manufacturer may obtain copies upon request to McDonnell Douglas Corporation, 3855 Lakewood Boulevard, Long Beach, California 90846, Attention: Business Unit Manager of Publications, C1-HCO (54-60). This information may be examined at the FAA, Northwest Mountain Region, Transport Airplane Directorate, 1601 Lind Avenue S.W., Renton, Washington, or the Los Angeles Aircraft Certification Office, 3229 East Spring Street, Long Beach, California.

This amendment (39-6819, AD 90-25-11) becomes effective on December 17, 1990.

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 100

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Mcdonnell Douglas99 aircraft
  • Douglas1 aircraft
By year built
19821999
Registered aircraft by year built: 87 aircraft
19821
19861
19875
19884
19893
19905
199129
19927
19932
19941
19961
19976
19986
199916

13 with no year recorded

By model

Aircraft

See all 100 aircraft