AD 91-07-13

91-07-13 BOEING: Amendment 39-6948. Docket No. 90-NM-213-AD.

Applicability: Model 757 series airplanes, listed in Boeing Service Bulletin 757-29- 0042, dated August 9, 1990, certificated in any category.

Compliance: Required within 3,000 hours time-in-service after the effective date of this AD, unless previously accomplished.

To prevent a latent failure of the alternate landing gear extension system, accomplish the following:

A. Install a bracket and attach the hydraulic tubing in accordance with Boeing Service Bulletin 757-29-0042, dated August 9, 1990.

B. An alternate means of compliance or adjustment of the compliance time, which provides an acceptable level of safety, may be used when approved by the Manager, Seattle Aircraft Certification Office (ACO), FAA, Transport Airplane Directorate.

NOTE: The request should be submitted directly to the Manager, Seattle ACO, and a copy sent to the cognizant FAA Principal Inspector (PI). The PI will thenforward comments or concurrence to the Seattle ACO.

C. Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate airplanes to a base in order to comply with the requirements of this AD.

All persons affected by this directive who have not already received the appropriate service documents from the manufacturer may obtain copies upon request to Boeing Commercial Airplane Group, P.O. Box 3707, Seattle, Washington 98124. These documents may be examined at the FAA, Northwest Mountain Region, Transport Airplane Directorate, 1601 Lind Avenue S.W., Renton, Washington.

This amendment (39-6948, AD 91-07-13) becomes effective on April 29, 1991.