AD 93-15-05

Airworthiness directive · Brakes · Airbus A320-111, A320-211, A320-212 and 4 more

Effective
August 18, 1993
Models
A320-111, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233
Data sheet
TCDSA28NM
Registered aircraft
563 matched by model
Product
Aircraft · Large airplane
Amendment
39-8651
Docket
93-NM-117-AD

Unofficial copy of the text in the FAA’s Dynamic Regulatory System. The FAA’s own copy is the authoritative one. DRS record last changed May 30, 2024.

On this page

The airworthiness directive

93-15-05 AIRBUS INDUSTRIE: Amendment 39-8651. Docket 93-NM-117-AD.

Applicability: Model A320 series airplanes on which Airbus Industrie Modification 20856 or Airbus Industrie Service Bulletin A320-32-1090 has been accomplished, and on which Airbus Industrie Modification 23597 or Airbus Industrie Service Bulletin A320-32-1114 has not been accomplished; certificated in any category.

Compliance: Required as indicated, unless accomplished previously.

To prevent reduced braking performance, accomplish the following:

(a) Within 30 days after the effective date of this AD, revise the Limitations Section of the FAA-approved Airplane Flight Manual (AFM) by inserting a copy of Airbus Industrie A320 Flight Manual Temporary Revision 9.99.99/89, Issue 2, dated December 16, 1992, in the AFM.

(b) Accomplishment of Airbus Industrie Modification 23597 or Airbus Industrie Service Bulletin A320-32-1114 and replacement of Airbus Industrie A320 Flight Manual Temporary Revision 9.99.99/89, Issue 2, dated December 16, 1992, with Airbus Industrie A320 Flight Manual Temporary Revision 9.99.99/89, Issue 3, dated February 8, 1993, in the AFM constitutes terminating action for the requirements of paragraph (a) of this AD.

(c) An alternative method of compliance or adjustment of the compliance time that provides an acceptable level of safety may be used if approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. Operators shall submit their requests through an appropriate FAA Principal Maintenance Inspector, who may add comments and then send it to the Manager, Standardization Branch, ANM-113.

NOTE: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Standardization Branch, ANM-113.

(d) Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate the airplane to a location where the requirements of this AD can be accomplished.

(e) The AFM revision shall be accomplished in accordance with Airbus Industrie A320 Flight Manual Temporary Revision 9.99.99/89, Issue 2, dated December 16, 1992, which contains the following list of effective pages:

Page Number Issue Level Shown on Page Date Shown on Page 1 2 December 16, 1992 2 Original November 3, 1992

This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR Part 51. Copies may be obtained from Airbus Industrie, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France. Copies may be inspected at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.

(f) This amendment becomes effective on August 18, 1993.

Affected TCDS · 1

The type certificate data sheets for the models this AD names, matched by model and maker.

Registered aircraft · 563

Registered aircraft whose airframe or engine model this AD names. Matched by model only, so check each against the AD’s applicability.

By aircraft maker
  • Airbus377 aircraft
  • Airbus Industrie184 aircraft
  • Airbus S A S2 aircraft
By year built
19912019
Registered aircraft by year built: 525 aircraft
19913
199213
19938
19941
19954
19967
19978
199825
199932
200035
200136
200225
200319
200418
200518
200625
200720
200820
200920
201017
201126
201232
201329
201419
201522
201614
201716
201811
20192

38 with no year recorded

By model

Aircraft

See all 563 aircraft