- Registered owner
- Duffy James R
- Location
- Boise, ID
- Owner type
- Individual
- Serial number
- 108-2587
- Year built
- 1947
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard, normal
- Airworthiness date
- May 16, 1989
- Certificate issued
- March 1, 2023
- Expires
- March 31, 2030
- Mode S code
- A00298
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 9
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1979 | 1 |
|---|---|
| 1991 | 1 |
| 2005 | 1 |
| 2012 | 1 |
| 2022 | 1 |
| 2024 | 1 |
| 2026 | 1 |
Superseded and historical ADs · 1
Information bulletins that may apply · 3
Advisory, not mandatory.
NTSB investigations
No NTSB investigations matched to N10CLMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Stinson 108-2 aircraft
FAA incident reports
No FAA accident or incident reports matched to N10CLMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Stinson 108-2 aircraft
Service difficulty reports
No reports matched to N10CLGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Stinson 108-2 aircraft
STCs that may be installed · 197
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Stinson 108-2
STC SA01233SEFabrication and installation of Alaskan Bushwheel LLC tail wheel and fork assemblySTC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01861SEFabrication and installation of Landing Light Controller