OpenAirDocs.org

N160PB

Open the Markdown

1981 Cessna 402C · Continental TSIO-520 series

Open in FAA registry

© OpenStreetMap
Registered owner
Hyannis Air Service Inc
Location
Hyannis, MA
Owner type
Corporation
Serial number
402C0493
Year built
1981
Type
Fixed wing multi engine
Engine
Reciprocating
Airworthiness
Standard, normal
Airworthiness date
March 25, 1999
Certificate issued
October 22, 2009
Expires
July 31, 2028
Mode S code
A0F2F5
Cessna 402CAirframe model · 10 seats · 2 engines · 115 registeredTCDS A7CEAirframe · Cessna 402CTCDS E8CEEngine · Continental TSIO-520 series

From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every Continental TSIO-520 model are included below.

On this page

Airworthiness directives that may apply · 79

Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.

1969In forceSuperseded2026
See all 95 ADs

Information bulletins that may apply · 24

Advisory, not mandatory.

See all 25 bulletins

NTSB investigations

No NTSB investigations matched to N160PBMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Cessna 402C aircraft

FAA incident reports · 1

FAA accident and incident reports matched to this aircraft by N-number and event date, checked against the reported make and model.

Incident 19930224009219IGround Taxi, Other Airplane · Fort Wayne, INLeft main gear collapsed while taxiing for takeoff. Found excessive moisture and ice in actuator switch.Feb 24, 1993 · Minor damage

Service difficulty reports · 23

Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.

SDR HYIA20261022001Beam · crackedDURING SCHEDULED ENGINE BEAM REPLACEMENT, UPON REMOVAL OF ENGINE BEAM A CRACK WAS VISUALLY IDENTIFIED ON THE INBOARD FACE OF THE ENGINE BEAM. THIS CRACK IS EMANATING FROM A FASTENER LOCATION COMMON TO THE INBOARD VERTICAL CROSS OVER BEAM UPRIGHT (OEM: 5654107-Oct 20, 2026 · N160PB · Cessna 402C · Nacelle/Pylon, Main FrameSDR HYIA20240429001Attach Fitting · corrodedDURING MAINTENANCE AN AREA OF CORROSION WAS VISUALLY IDENTIFIED ON THE RIGHT HAND LOWER FUSELAGE ATTACH FITTING (P/N: 0811350-12). THIS CORROSION MEASURES APPROXIMATELY .313 INCHES TALL, .353 WIDE, AND HAS A MAXIMUM DEPTH OF .016. IT IS LOCATED ON THE FORWARD Apr 26, 2024 · N160PB · Cessna 402C · Fuselage Main, Attach FittingsSDR HYIA20230724001Fitting · corrodedDURING MAINTENANCE A SPOT OF CORROSION WAS VISUALLY IDENTIFIED ON THE AFT FACE OF THE FWD RH UPPER FUSELAGE ATTACH FITTING PN: 0811350-9. THIS CORROSION MEASURES .275 WIDE, AND .226 TALL, WITH AN APPROXIMATE DEPTH OF .018 AND IS CONSISTENT WITH OTHER CORROSIONJul 20, 2023 · N160PB · Cessna 402C · Fuselage, Wing Attach Fittings
See all 23 reports

STCs that may be installed · 321

Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.

See all 321 STCs