- Registered owner
- Cuttr Italia LLC
- Location
- Phoenix, AZ
- Owner type
- LLC
- Serial number
- 1185/US
- Type
- Fixed wing single engine
- Engine
- 4 cycle
- Certificate issued
- April 4, 2026
- Expires
- April 30, 2033
- Mode S code
- A16C14
Costruzioni Aeronautiche Tecna P-MENTORTCDS A00067IBAirframe · Costruzioni Aeronautiche Tecna P-MENTOR
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 1
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
Airframe · Costruzioni Aeronautiche Tecna P-MENTOR
AD 2025-17-13Cabin Equipment/FurnishingsInformation bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations
No NTSB investigations matched to N191CMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Costruzioni Aeronautiche Tecna P-MENTOR aircraft
FAA incident reports
No FAA accident or incident reports matched to N191CMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Costruzioni Aeronautiche Tecna P-MENTOR aircraft
Service difficulty reports
No reports matched to N191CGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Costruzioni Aeronautiche Tecna P-MENTOR aircraft
STCs that may be installed
No STCs matched this aircraft’s modelsSTCs are matched through the model’s type certificate data sheet, and this registry model isn’t matched to one.
Earlier aircraft with this N-number · 3
These aircraft carried N191C before the one registered now. The FAA can assign a mark to another aircraft once a registration is cancelled.