- Registered owner
- Murfield Dean
- Location
- Locust Grove, GA
- Owner type
- Individual
- Serial number
- 306
- Year built
- 2000
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard, utility
- Airworthiness date
- May 26, 2000
- Certificate issued
- July 5, 2025
- Expires
- July 31, 2032
- Mode S code
- A1ED42
Estumkeda Ltd DBA Micco Acft MAC-145ATCDS 3A1Airframe · Estumkeda Ltd DBA Micco Acft MAC-145AEngine modelLycoming I0360 SER A&C
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 2
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 2005 | 1 |
|---|---|
| 2022 | 1 |
Airframe · Estumkeda Ltd DBA Micco Acft MAC-145A
AD 2022-03-15Fuel Quantity IndicatorAD 2005-01-19Mode S transpondersInformation bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations · 1
Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.
FAA incident reports · 1
FAA accident and incident reports matched to this aircraft by N-number and event date, checked against the reported make and model.
Service difficulty reports
No reports matched to N223MJGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Estumkeda Ltd DBA Micco Acft MAC-145A aircraft
STCs that may be installed · 68
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Estumkeda Ltd DBA Micco Acft MAC-145A
STC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01800SEFabrication and installation of new or replacement of existing instrument panel lights dimmer control.STC SA01861SEFabrication and installation of Landing Light Controller