Registered owner
Nesher Tecnam I LLC
Location
Sheridan, WY
Owner type
LLC
Serial number
1167/US
Year built
2026
Type
Fixed wing single engine
Engine
4 cycle
Airworthiness
Standard, normal
Airworthiness date
March 26, 2026
Certificate issued
July 10, 2026
Expires
July 31, 2033
Mode S code
A3DC3D

From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every Rotax 912ISC model are included below.

On this page

Airworthiness directives that may apply · 4

Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.

2023In forceSuperseded2026
ADs by the year they took effect: 5 ADs
20231
20253
20261
Superseded and historical ADs · 1

Information bulletins that may apply

Advisory, not mandatory.

No bulletins matched this aircraft’s models

NTSB investigations

No NTSB investigations matched to N348NLMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Costruzioni Aeronautiche Tecna P-MENTOR aircraft

FAA incident reports

No FAA accident or incident reports matched to N348NLMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Costruzioni Aeronautiche Tecna P-MENTOR aircraft

Service difficulty reports

No reports matched to N348NLGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Costruzioni Aeronautiche Tecna P-MENTOR aircraft

STCs that may be installed

No STCs matched this aircraft’s modelsSTCs are matched through the model’s type certificate data sheet, and this registry model isn’t matched to one.