- Registered owner
- Bradley Glen C
- Location
- Pensacola, FL
- Owner type
- Individual
- Serial number
- 35
- Year built
- 2023
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Experimental, amateur built
- Airworthiness date
- October 17, 2023
- Certificate issued
- June 21, 2023
- Expires
- June 30, 2030
- Mode S code
- A3E3CF
- Kit
- Sport Performance Aviation LLC PANTHER
From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every Franklin 4A235 model are included below.
On this page
Airworthiness directives that may apply · 2
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1969 | 1 |
|---|---|
| 2003 | 1 |
Superseded and historical ADs · 1
Information bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations
No NTSB investigations matched to N35PXMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Allan G Pixley PANTHER aircraft
FAA incident reports
No FAA accident or incident reports matched to N35PXMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Allan G Pixley PANTHER aircraft
Service difficulty reports
No reports matched to N35PXGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Allan G Pixley PANTHER aircraft
STCs that may be installed · 6
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Engine · Franklin 4A235 series
STC SE2932SWInstall carburetor air temperature indicator. Approved for Aircooled Motors (Franklin Engine Co.) equipped with float carburetors. Model eligibility included here may not be inclusive.STC SE1311SOInstallation of Shivers carburetor temperature gauge with a Richter Aero Equipment B-5 carburetor temperature probe.STC SE02602ATInstallation of an alternate engine driven fuel pump in accordance with CJ Aviation "Installation Instructions for Fuel Pump 6005-2A", IR, dated 12/23/02, drawing no. 6005-2A "Fuel Pump", IR, dated 11/14/02 and drawing no. 6005-2B "Cap Plug", IR, dated 12/03/02 or later FAA approved revisions of either document.STC SE8776SWInstallation of coated cylinders and piston rings.STC SE3331NMLycoming valve cover gasketSTC SE1-201Installation of the Richter Aero Equipment Type B-4 or B-5 Temperature Probe. (O-360 SERIES (excl. A1C, C2B, C2D))