- Registered owner
- Lost In Time LLC
- Location
- Rochester, NY
- Owner type
- LLC
- Serial number
- 1444
- Year built
- 1946
- Type
- Fixed wing multi engine
- Engine
- Reciprocating
- Airworthiness
- Standard
- Certificate issued
- January 18, 2001
- Expires
- November 30, 2029
- Mode S code
- A4B47A
From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every Lycoming GO-435C&D model are included below.
On this page
Airworthiness directives that may apply · 3
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
Information bulletins that may apply · 1
Advisory, not mandatory.
Airframe · Grumman G-44A
SAIB SW-18-31Navigation, Attitude, and Direction Data SystemNTSB investigations
No NTSB investigations matched to N402EGMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Grumman G-44A aircraft
FAA incident reports
No FAA accident or incident reports matched to N402EGMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Grumman G-44A aircraft
Service difficulty reports
No reports matched to N402EGGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Grumman G-44A aircraft
STCs that may be installed · 121
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Grumman G-44A
STC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01800SEFabrication and installation of new or replacement of existing instrument panel lights dimmer control.STC SA01861SEFabrication and installation of Landing Light Controller