- Registered owner
- Kansas City Aerosports
- Location
- Overland Park, KS
- Owner type
- Individual
- Serial number
- 6885
- Year built
- 2019
- Type
- Balloon
- Engine
- None
- Airworthiness
- Standard, balloon
- Airworthiness date
- March 20, 2019
- Certificate issued
- April 24, 2019
- Expires
- April 30, 2029
- Mode S code
- A4F785
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 1
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
Airframe · Cameron Balloons Z-70
AD 2013-03-10HardwareInformation bulletins that may apply · 1
Advisory, not mandatory.
Airframe · Cameron Balloons Z-70
SAIB CE-11-44Fuel: Cylinder Strap InstallationNTSB investigations
No NTSB investigations matched to N419WBMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Cameron Balloons Z-70 aircraft
FAA incident reports
No FAA accident or incident reports matched to N419WBMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Cameron Balloons Z-70 aircraft
Service difficulty reports
No reports matched to N419WBGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Cameron Balloons Z-70 aircraft
STCs that may be installed · 4
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Cameron Balloons Z-70
STC SB10564SCInstallation of Night Position LightsSTC SB09657RCInstallation of Aircraft Position LightsSTC SB04407ATInstallation of the DBI-III OmegaSTC SB02996CHReplace the Cameron Balloons US burner with Thunder & Colt (B2EU) and (B3EU)) Stratus double burner via standard burner frame gimbal block.