- Registered owner
- Scott Squared LLC
- Location
- Lindale, TX
- Owner type
- LLC
- Serial number
- 425-0068
- Type
- Fixed wing multi engine
- Engine
- Turbo-prop
- Airworthiness
- Standard, normal
- Airworthiness date
- September 14, 1981
- Certificate issued
- January 20, 2023
- Expires
- January 31, 2030
- Mode S code
- A50FDD
From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every U/A Canada PT6A model are included below.
On this page
Airworthiness directives that may apply · 16
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1984 | 2 |
|---|---|
| 1986 | 1 |
| 1994 | 1 |
| 1996 | 1 |
| 1997 | 1 |
| 1998 | 3 |
| 2001 | 2 |
| 2005 | 3 |
| 2018 | 2 |
| 2023 | 1 |
See all 17 ADs
Information bulletins that may apply · 8
Advisory, not mandatory.
Airframe · Cessna 425
SAIB CE-13-27R1Flight Controls Frayed Flap Extend CablesSAIB AIR-21-20TE FLAP CONTROL SYSTEM, Flight Controls –Flap Cable TensionSAIB CE-14-11R1Landing Gear; Nose Landing Gear TrunnionsSAIB CE-13-22Electrical Power System Circuit Breaker SwitchSAIB CE-13-09Doors: Cargo/Baggage DoorSAIB CE-10-01Fuel: Fuel Tank Selector Valve SystemsSAIB CE-06-46R1SAIB ACE-99-05Historical bulletins · 1
NTSB investigations
No NTSB investigations matched to N425TBMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Cessna 425 aircraft
FAA incident reports
No FAA accident or incident reports matched to N425TBMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Cessna 425 aircraft
Service difficulty reports · 6
Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.
SDR 2009FA0000136Fork · crackedPREVIOUSLY REPORTED TO MFG IAW INSTRUCTIONS STIPULATED IN SUPPLEMENTAL INSPECTION DOCUMENTS FOR CONTINUED AIRWORTHINESS OF THE AIRPLANE. NOSE GEAR FORK FAILED NDT IAW SUPPLEMENTAL INSPECTION 32-20-02. REPLACED NOSE FORK ASSEMBLY PN 5842000-5.SDR 2009FA0000135Fork · crackedPREVIOUSLY REPORTED TO MFG IAW INSTRUCTIONS STIPULATED IN SUPPLEMENTAL INSPECTION DOCUMENTS FOR CONTINUED AIRWORTHINESS OF THE AIRPLANE. NOSE GEAR FORK FAILED NDT IAW SUPPLEMENTAL INSPECTION 32-20-02. REPLACED NOSE FORK ASSEMBLY PN 5842000-5.SDR 2009FA0000177Strut · wornPREVIOUSLY REPORTED DURING SUPPLEMENTAL INSPECTION FOR CONTINUED AIRWORTHINESS OF THE AIRPLANE. DURING DIASSEMBLY AND INSPECTION IAW SUPPLENTAL INSPECTION NR 32-10-06 FOUND PROTECTIVE COATING WORN OFF PISTON BARREL PN 5941132-8. REPAIRED PISTON BARREL WITH PSDR 2009FA0000172Strut · wornPREVIOUSLY REPORTED DURING SUPPLEMENTAL INSPECTION FOR CONTINUED AIRWORTHINESS OF THE AIRPLANE. LT MLG PISTON BARREL HAS BARE METAL SPOTS FOUND DURING SUPPLEMENTAL INSP NR 32-10-06. REPAIRED PISTON BARREL WITH PROTECTIVE COATING.SDR 2009FA0000124Torque Tube · corrodedPREVIOUSLY REPORTED TO MFG IAW INSTRUCTIONS STIPULATED IN THE SUPPLEMENTAL INSP DOCUMENTS FOR CONTINUED AIRWORTHINESS OF THE AIRPLANE. FOUND RUDDER TORQUE TUBE RUSTED DURING INSPECTION OF SUPPLEMENTAL INSP 27-20-04. REPLACED TORQUE TUBE PN 5833011-9.SDR 2009FA0000107Fitting · corrodedPREVIOUSLY REPORTED IAW INSTRUCTIONS BY MFG SUPPLEMENTAL INSPECTION DOCUMENTS FOR CONTINUED AIRWORTHINESS OF THE AIRPLANE. THE LT WING LWR FWD ATTACH FITTING PN 0811350-10 FAILED NDT INSPECTION. REPLACED WING FITTING.
STCs that may be installed · 161
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Cessna 425
STC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01800SEFabrication and installation of new or replacement of existing instrument panel lights dimmer control.STC SA01861SEFabrication and installation of Landing Light Controller