- Registered owner
- Dynamic Avlease Inc
- Location
- Bridgewater, VA
- Owner type
- Corporation
- Serial number
- BT-14
- Type
- Fixed wing multi engine
- Engine
- Turbo-prop
- Certificate issued
- June 15, 2005
- Expires
- July 31, 2027
- Mode S code
- A54A06
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 35
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1977 | 1 |
|---|---|
| 1980 | 2 |
| 1983 | 1 |
| 1985 | 1 |
| 1987 | 1 |
| 1989 | 2 |
| 1990 | 2 |
| 1991 | 1 |
| 1992 | 2 |
| 1994 | 1 |
| 1995 | 1 |
| 1996 | 1 |
| 1997 | 3 |
| 1998 | 7 |
| 2003 | 3 |
| 2004 | 2 |
| 2005 | 5 |
| 2006 | 1 |
| 2008 | 1 |
| 2009 | 1 |
| 2023 | 1 |
See all 40 ADs
Information bulletins that may apply · 1
Advisory, not mandatory.
Airframe · Beech 200T
SAIB CE-12-36Flight Controls: AileronNTSB investigations
No NTSB investigations matched to N44UMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Beech 200T aircraft
FAA incident reports
No FAA accident or incident reports matched to N44UMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Beech 200T aircraft
Service difficulty reports · 1
Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.
STCs that may be installed · 268
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Beech 200T
STC SA4175NMInstallation of fully enclosed main landing gear door system for high-flotation- gear-equipped aircraft.STC SA01800SEFabrication and installation of new or replacement of existing instrument panel lights dimmer control.STC SA01861SEFabrication and installation of Landing Light Controller