- Registered owner
- Rumsey Todd A
- Location
- Sturgis, MI
- Owner type
- Individual
- Serial number
- 058B-13213
- Year built
- 1944
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard, glider
- Airworthiness date
- February 1, 1968
- Certificate issued
- January 11, 2012
- Expires
- January 31, 2028
- Mode S code
- A5CBCD
From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every Continental A&C65 model are included below.
On this page
Airworthiness directives that may apply · 10
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1969 | 1 |
|---|---|
| 1980 | 1 |
| 1981 | 2 |
| 1993 | 1 |
| 1995 | 1 |
| 1998 | 2 |
Superseded and historical ADs · 1
Information bulletins that may apply · 3
Advisory, not mandatory.
NTSB investigations · 1
Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.
FAA incident reports
No FAA accident or incident reports matched to N47262Matched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Aeronca 0-58B aircraft
Service difficulty reports
No reports matched to N47262General aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Aeronca 0-58B aircraft
STCs that may be installed · 29
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Engine · Continental A&C65 series
STC SE04651CHTo allow use of l00R grade aviation fuel meeting Swift Fuel, LLC specification SPEC-l00R-22STC SE2932SWInstall carburetor air temperature indicator. Approved for Aircooled Motors (Franklin Engine Co.) equipped with float carburetors. Model eligibility included here may not be inclusive.STC SE208SOInstallation of ice indicator in the carburetor.