- Registered owners
- Supp Charles MSupp Jolene M
- Location
- Wells, NV
- Owner type
- Co-owned
- Serial number
- 2148B
- Year built
- 1950
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard
- Certificate issued
- August 2, 1991
- Expires
- January 31, 2028
- Mode S code
- A62530
North American NAVION BTCDS A-782Airframe · North American NAVION BTCDS E-228Engine · Lycoming GO-435
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 23
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1962 | 1 |
|---|---|
| 1968 | 1 |
| 1979 | 1 |
| 1991 | 1 |
| 1998 | 1 |
| 2003 | 1 |
| 2004 | 1 |
| 2005 | 1 |
| 2008 | 1 |
| 2012 | 1 |
| 2022 | 1 |
Airframe · North American NAVION B
AD 2022-03-15Fuel Quantity IndicatorAD 2008-05-14Fuel systemAD 2005-01-19Mode S transpondersInformation bulletins that may apply · 5
Advisory, not mandatory.
NTSB investigations · 1
Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.
FAA incident reports · 1
FAA accident and incident reports matched to this aircraft by N-number and event date, checked against the reported make and model.
Service difficulty reports
No reports matched to N4951KGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on North American NAVION B aircraft
STCs that may be installed · 248
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · North American NAVION B
STC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01800SEFabrication and installation of new or replacement of existing instrument panel lights dimmer control.STC SA01861SEFabrication and installation of Landing Light Controller