- Registered owner
- Weiss Elliott
- Location
- Fresno, TX
- Owner type
- Individual
- Serial number
- F5-018
- Year built
- 1989
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard, normal
- Airworthiness date
- February 1, 1989
- Certificate issued
- April 25, 2018
- Expires
- April 30, 2028
- Mode S code
- A645C8
From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every Jacobs R755B model are included below.
On this page
Airworthiness directives that may apply · 0
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
No ADs matched this aircraft’s modelsADs on appliances, propellers and installed equipment aren’t matched by model; check those separately.
Information bulletins that may apply · 1
Advisory, not mandatory.
Airframe · Waco YMF
SAIB SW-18-31Navigation, Attitude, and Direction Data SystemNTSB investigations
No NTSB investigations matched to N503HDMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Waco YMF aircraft
FAA incident reports
No FAA accident or incident reports matched to N503HDMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Waco YMF aircraft
Service difficulty reports
No reports matched to N503HDGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Waco YMF aircraft
STCs that may be installed · 73
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Waco YMF
STC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01800SEFabrication and installation of new or replacement of existing instrument panel lights dimmer control.STC SA01861SEFabrication and installation of Landing Light Controller