- Registered owner
- Gear Aviation LLC
- Location
- Missoula, MT
- Owner type
- LLC
- Serial number
- B-14
- Year built
- 1947
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard, normal
- Airworthiness date
- May 13, 2013
- Certificate issued
- April 11, 2024
- Expires
- April 30, 2031
- Mode S code
- AAEF9B
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 2
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1999 | 1 |
|---|---|
| 2000 | 1 |
| 2023 | 1 |
Superseded and historical ADs · 1
Information bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations
No NTSB investigations matched to N80315Matched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Beech G17S aircraft
FAA incident reports
No FAA accident or incident reports matched to N80315Matched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Beech G17S aircraft
Service difficulty reports
No reports matched to N80315General aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Beech G17S aircraft
STCs that may be installed · 43
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Beech G17S
STC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01800SEFabrication and installation of new or replacement of existing instrument panel lights dimmer control.STC SA01861SEFabrication and installation of Landing Light Controller