- Registered owner
- Steinheiser Terry N
- Location
- Renfrew, PA
- Owner type
- Individual
- Serial number
- 52-7934
- Type
- Rotorcraft
- Engine
- Reciprocating
- Airworthiness
- Standard, normal
- Airworthiness date
- May 6, 1998
- Certificate issued
- April 25, 2024
- Expires
- April 30, 2031
- Mode S code
- AC33FB
From the FAA registry file of October 24, 2026. The registry lists only the engine series, so ADs for every Franklin 6A&6V335 model are included below.
On this page
Airworthiness directives that may apply · 0
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
No ADs matched this aircraft’s modelsADs on appliances, propellers and installed equipment aren’t matched by model; check those separately.
Information bulletins that may apply
Advisory, not mandatory.
No bulletins matched this aircraft’s models
NTSB investigations
No NTSB investigations matched to N8859Matched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Bell H13G aircraft
FAA incident reports
No FAA accident or incident reports matched to N8859Matched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Bell H13G aircraft
Reports on N8859 not matched to an aircraft · 1
They name N8859, but no registry record covers the date, the aircraft registered then was built later, or the report describes another aircraft.
Service difficulty reports
No reports matched to N8859General aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Bell H13G aircraft
STCs that may be installed
No STCs matched this aircraft’s modelsSTCs are matched through the model’s type certificate data sheet, and this registry model isn’t matched to one.