- Registered owner
- Iowa Gen Svc Inc
- Location
- Des Moines, IA
- Owner type
- Corporation
- Serial number
- 108-2551
- Year built
- 1947
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard
- Mode S code
- AD49BF
- Registry status
- Registration revoked
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 9
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1979 | 1 |
|---|---|
| 1991 | 1 |
| 2005 | 1 |
| 2012 | 1 |
| 2022 | 1 |
| 2024 | 1 |
| 2026 | 1 |
Superseded and historical ADs · 1
Information bulletins that may apply · 3
Advisory, not mandatory.
NTSB investigations · 1
Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model.
Investigations on N9551K not matched to an aircraft · 1
They name N9551K, but no registry record covers the date, the aircraft registered then was built later, or the investigation describes another aircraft.
FAA incident reports
No FAA accident or incident reports matched to N9551KMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Stinson 108-2 aircraft
Service difficulty reports
No reports matched to N9551KGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Stinson 108-2 aircraft
STCs that may be installed · 197
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Stinson 108-2
STC SA01233SEFabrication and installation of Alaskan Bushwheel LLC tail wheel and fork assemblySTC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01861SEFabrication and installation of Landing Light Controller