OpenAirDocs.org

N961RP

Open the Markdown

Cub Crafters CC18-180

Open in FAA registry

© OpenStreetMap
Registered owner
Jetage Cutting Tech Inc
Location
Henderson, CO
Owner type
Corporation
Serial number
CC18-0008
Type
Fixed wing single engine
Engine
Reciprocating
Certificate issued
February 12, 2013
Expires
February 28, 2029
Mode S code
AD6162
Cub Crafters CC18-180Airframe model · 2 seats · 1 engine · 83 registeredTCDS A00006SEAirframe · Cub Crafters CC18-180

From the FAA registry file of October 24, 2026.

On this page

Airworthiness directives that may apply · 1

Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.

Information bulletins that may apply · 1

Advisory, not mandatory.

NTSB investigations

No NTSB investigations matched to N961RPMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Cub Crafters CC18-180 aircraft

FAA incident reports

No FAA accident or incident reports matched to N961RPMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Cub Crafters CC18-180 aircraft

Service difficulty reports

No reports matched to N961RPGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Cub Crafters CC18-180 aircraft

STCs that may be installed · 80

Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.

See all 80 STCs