- Registered owner
- Dutchess Community College
- Location
- Poughkeepsie, NY
- Owner type
- Government
- Serial number
- 404-0124
- Type
- Fixed wing multi engine
- Engine
- Reciprocating
- Certificate issued
- June 20, 2019
- Expires
- June 30, 2029
- Mode S code
- AD59F4
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 20
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1978 | 2 |
|---|---|
| 1980 | 3 |
| 1984 | 1 |
| 1986 | 1 |
| 1989 | 1 |
| 1992 | 1 |
| 1995 | 1 |
| 1996 | 1 |
| 1997 | 1 |
| 1998 | 2 |
| 2000 | 1 |
| 2001 | 1 |
| 2005 | 2 |
| 2023 | 2 |
See all 20 ADs
Information bulletins that may apply · 7
Advisory, not mandatory.
Historical bulletins · 1
NTSB investigations
No NTSB investigations matched to N96BPMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Cessna 404 aircraft
FAA incident reports
No FAA accident or incident reports matched to N96BPMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Cessna 404 aircraft
Service difficulty reports
No reports matched to N96BPGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Cessna 404 aircraft
STCs that may be installed · 157
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Cessna 404
STC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01800SEFabrication and installation of new or replacement of existing instrument panel lights dimmer control.STC SA01861SEFabrication and installation of Landing Light Controller