- Registered owner
- Becker David J
- Location
- Austin, TX
- Owner type
- Individual
- Serial number
- 108346
- Year built
- 1956
- Type
- Fixed wing single engine
- Engine
- Reciprocating
- Airworthiness
- Standard, normal
- Airworthiness date
- July 17, 1956
- Certificate issued
- July 17, 2013
- Expires
- July 31, 2029
- Mode S code
- AD91CD
From the FAA registry file of October 24, 2026.
On this page
Airworthiness directives that may apply · 8
Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.
| 1956 | 1 |
|---|---|
| 1979 | 1 |
| 2005 | 1 |
| 2022 | 1 |
Information bulletins that may apply · 1
Advisory, not mandatory.
Airframe · Stinson 108
SAIB SW-18-31Navigation, Attitude, and Direction Data SystemNTSB investigations
No NTSB investigations matched to N97346Matched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Stinson 108 aircraft
FAA incident reports
No FAA accident or incident reports matched to N97346Matched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Stinson 108 aircraft
Service difficulty reports
No reports matched to N97346General aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Stinson 108 aircraft
STCs that may be installed · 168
Approved for this aircraft’s airframe or engine model. The registry doesn’t record which STCs an aircraft has; its records do.
Airframe · Stinson 108
STC SA01233SEFabrication and installation of Alaskan Bushwheel LLC tail wheel and fork assemblySTC SA02571SEInstallation of Garmin G500/G600 TXi Integrated Avionics System (Primary Flight Display, Multi-Function Display, and Engine Indicating System Display).STC SA01861SEFabrication and installation of Landing Light Controller