Registered owner
Cutter Italia LLC
Location
Phoenix, AZ
Owner type
LLC
Serial number
1113
Type
Fixed wing single engine
Engine
4 cycle
Certificate issued
October 29, 2026
Expires
October 31, 2033
Mode S code
ADF428

From the FAA registry file of November 12, 2026.

On this page

Airworthiness directives that may apply · 1

Matched by this aircraft’s airframe and engine models. Each AD’s applicability may narrow it by serial number, part number or equipment.

Airframe · Costruzioni Aeronautiche Tecna P-MENTOR

AD 2025-17-13Cabin Equipment/FurnishingsEffective Sep 26, 2025

Information bulletins that may apply

Advisory, not mandatory.

No bulletins matched this aircraft’s models

NTSB investigations

No NTSB investigations matched to N999AXMatched by N-number and event date, checked against the reported serial number, make and model. Investigations from before this aircraft carried the mark are under Earlier aircraft. Investigations on Costruzioni Aeronautiche Tecna P-MENTOR aircraft

FAA incident reports

No FAA accident or incident reports matched to N999AXMatched by N-number and event date, checked against the reported make and model. Reports from before this aircraft carried the mark are under Earlier aircraft. Reports on Costruzioni Aeronautiche Tecna P-MENTOR aircraft

Service difficulty reports

No reports matched to N999AXGeneral aviation reporting is voluntary. Matched to this aircraft by N-number and event date, checked against the reported serial number, make and model. Reports on Costruzioni Aeronautiche Tecna P-MENTOR aircraft

STCs that may be installed

No STCs matched this aircraft’s modelsSTCs are matched through the model’s type certificate data sheet, and this registry model isn’t matched to one.