- Manufacturer (registry)
- ALLISON
- Model
- 501-D13D
- Registry code
- 03057
- Installed in
- 0 registered aircraft
- Type
- Turbo-prop
- Power
- 3,750 hp
- Data sheet
- TCDSE-282
- Holder
- Rolls-Royce Corporation
Model codes come from the FAA registry’s reference file.
On this page
Airworthiness directives that may apply · 11
ADs whose products match this engine model. Each AD’s applicability may narrow it by serial number, part number or configuration.
| 1960 | 1 |
|---|---|
| 1969 | 1 |
| 1975 | 2 |
| 1978 | 1 |
| 1979 | 1 |
| 1980 | 1 |
| 1981 | 1 |
| 1986 | 1 |
| 2003 | 1 |
| 2007 | 1 |
Engine · Allison 501-D13D
AD 2006-25-12Removal from service of certain turbine rotor componentsAD 86-17-06Thrust Sensitive Switch AssemblyAD 81-03-021st Stage Turbine WheelAD 80-14-131st Stage Turbine WheelsAD 79-25-03Second, Third, And Fourth Stage Turbine WheelsAD 78-09-09Third Or Fourth Stage Turbine WheelAD 75-22-05Second Stage Turbine WheelsAD 75-17-32Second Stage Turbine WheelsAD 69-21-03First Stage Compressor WheelsAD 60-21-01Torquemeter HousingAD 60-07-01Low Speed Ground IdleSuperseded and historical ADs · 1
Query with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('03057'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('03057'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Registered aircraft · 0
NTSB investigations · 1
Aircraft matched to this engine model through the registry, by N-number and event date, checked against the reported serial number, make and model.
Of 1 case with NTSB’s older coding, defined in its coding manual.
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c.\"mKey\" = a.case_mkey
WHERE a.engine_model_code IN ('03057')
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a JOIN 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c ON c."mKey" = a.case_mkey
WHERE a.engine_model_code IN ('03057')
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
FAA incident reports · 1
Matched to this engine model through the registry, by N-number and event date, checked against the reported make and model.
Query with SQL
duckdb -csv -c "SELECT report_number, event_date, event_type, city, state, aircraft_make, aircraft_model, aircraft_damage, fatal_injuries, n_number
FROM 'https://openairdocs.org/data/latest/faa_incident_report.parquet'
WHERE engine_model_code IN ('03057')
ORDER BY event_date DESC, report_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT report_number, event_date, event_type, city, state, aircraft_make, aircraft_model, aircraft_damage, fatal_injuries, n_number
FROM 'https://openairdocs.org/data/latest/faa_incident_report.parquet'
WHERE engine_model_code IN ('03057')
ORDER BY event_date DESC, report_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Service difficulty reports · 160
Query with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = '501D13D' ORDER BY difficulty_date DESC"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = '501D13D' ORDER BY difficulty_date DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
STCs that may be installed · 1
Approved for this engine model: the STC’s model list names it on its data sheet, or a series that includes it. The registry doesn’t record which STCs an aircraft has.
Query with SQL
duckdb -csv -c "SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_engine_model_stc.parquet'
WHERE engine_model_code IN ('03057')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_number"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT s.stc_number, s.description, s.holder, s.status, s.status_date, m.matched_model
FROM (
SELECT stc_number, min(matched_model) AS matched_model
FROM 'https://openairdocs.org/data/latest/faa_engine_model_stc.parquet'
WHERE engine_model_code IN ('03057')
GROUP BY stc_number
) m JOIN 'https://openairdocs.org/data/latest/faa_stc.parquet' s USING (stc_number)
ORDER BY s.status = 'Current' DESC, s.status_date DESC, s.stc_numberRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.