- Manufacturer (registry)
- GE
- Model
- CF34-8E5A1
- Registry code
- 30062
- Installed in
- 0 registered aircraft
- Type
- Turbo-fan
- Power
- 14,510 lb thrust
- Data sheet
- TCDSE00063EN
- Holder
- General Electric Company GE Aerospace
Model codes come from the FAA registry’s reference file.
On this page
Airworthiness directives that may apply · 16
ADs whose products match this engine model. Each AD’s applicability may narrow it by serial number, part number or configuration.
| 2004 | 1 |
|---|---|
| 2005 | 1 |
| 2008 | 2 |
| 2009 | 1 |
| 2013 | 1 |
| 2017 | 2 |
| 2018 | 1 |
| 2021 | 2 |
| 2022 | 4 |
| 2023 | 1 |
| 2025 | 1 |
| 2026 | 1 |
See all 18 ADs
Query with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('30062'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('30062'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Registered aircraft · 0
No aircraft currently registered with this engine model
NTSB investigations
No NTSB investigations matched to aircraft with this engine modelMatched through the registry by N-number, so foreign aircraft and some older cases aren’t counted.
FAA incident reports
No reports matched to aircraft with this engine modelMatched through the registry by N-number, so foreign aircraft and some older reports aren’t counted.
Service difficulty reports · 194
SDR CA190809017Bushing · worn(CAN) FLIGHT CREW ADVISED MTCE THE THE #1 ENGINE WAS PERSISTENTLY APPROACHING (BUT NOT EXCEEDING) ITT LIMITS DURING STARTS. MOC REQUESTED AN INSPECTION OF THE VGV SYSTEM. AN UNUSUAL AMOUNT OF PLAY WAS FOUND IN ONE OF THE ACTUATORS (MASTER) ON REMOVAL THE ATTASDR CA190604019Pcu · corroded(CAN) SPOILER FAULT EICAS MESSAGE AFTER TOUCH DOWN ,FLIGHT CONTROL NO DISPATCH MESSAGE FOLLOWED SHORTLY AFTER . AIRCRAFT OUT OF SERVICE, AOG. WAS TOWED TO HANGAR DURING T/S FOUND L/H WING O/B PCU CONNECTOR HEAVILY CORRODED AND ALSO CONNECTOR AIRFRAME SIDE MFS SDR CA190502003Rod · broken(CAN) DURING SERVICE CHECK, LEFT WING INB FLAP WAS FOUND LOWER THAN OTHER FLAP. INB AFT FLAP OUTB ROD WAS FOUND SHORTER THAN THE INB ROD. ROD WAS FOUND BROKEN IN HALF. REF: AIPC: 57-54-00-10 P/N: 171-03779-901. TRAX DEFECT 145287. THIS IS NOT THE FIRST TIME TH
See all 194 difficulty reportsQuery with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'CF348E5A1' ORDER BY difficulty_date DESC"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'CF348E5A1' ORDER BY difficulty_date DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.