- Manufacturer (registry)
- HONEYWELL
- Model
- ALF502R-3A
- Registry code
- 33873
- Installed in
- 0 registered aircraft
- Type
- Turbo-fan
- Power
- 6,970 lb thrust
- Data sheet
- TCDSE6NE
- Holder
- CFS Aeroproducts Inc.
Model codes come from the FAA registry’s reference file.
On this page
Airworthiness directives that may apply · 20
ADs whose products match this engine model. Each AD’s applicability may narrow it by serial number, part number or configuration.
| 1982 | 1 |
|---|---|
| 1987 | 1 |
| 1990 | 1 |
| 1993 | 3 |
| 1995 | 2 |
| 1997 | 2 |
| 1999 | 1 |
| 2000 | 2 |
| 2002 | 3 |
| 2003 | 1 |
| 2006 | 1 |
| 2010 | 1 |
| 2011 | 1 |
| 2012 | 1 |
| 2020 | 1 |
See all 23 ADs
Query with SQL
duckdb -csv -c "SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('33873'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT d.ad_number, d.status, d.subject, d.effective_date
FROM 'https://openairdocs.org/data/latest/faa_directive.parquet' d
WHERE d.ad_id IN (SELECT ad_id FROM 'https://openairdocs.org/data/latest/faa_engine_model_directive.parquet' WHERE engine_model_code IN ('33873'))
ORDER BY coalesce(d.effective_date, d.publication_date, d.issue_date) DESC, d.ad_number DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Registered aircraft · 0
No aircraft currently registered with this engine model
NTSB investigations
No NTSB investigations matched to aircraft with this engine modelMatched through the registry by N-number, so foreign aircraft and some older cases aren’t counted.
FAA incident reports
No reports matched to aircraft with this engine modelMatched through the registry by N-number, so foreign aircraft and some older reports aren’t counted.
Service difficulty reports · 38
SDR AUS20031010Windshield · cracked(AUS) RT WINDSCREEN (A) PANEL CRACKED IN OUTER PLY.SDR AUS20030756Computer · faulty(AUS) ANTI-SKID FAULT LIGHT ILLUMINATED DURING TAKEOFF ROLL. THE PROBLEM WAS FIXED BY RERACKING THE ANTI-SKID COMPUTER.SDR AUS20030374Circuit Breaker · failed(AUS) RT OUTER FUEL BOOST PUMP CIRCUIT BREAKER OVERHEATED AND BURNED. HEAT FROM THE BURNED CB DAMAGED THE ADJACENT BRAKE FAN CIRCUIT AND CAUSED FUMES IN THE FLIGHT DECK AND CABIN.
See all 38 difficulty reportsQuery with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'ALF502R3A' ORDER BY difficulty_date DESC"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE engine_model_key = 'ALF502R3A' ORDER BY difficulty_date DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.