20061013030989A

Accident · Substantial damage

FAA accident report · Cessna 180A · Statesville, NC · October 13, 2006

Date
October 13, 2006 · 15:05 local
Place
Statesville, NC
Airport
Statesville Regional
Phase of flight
Roll-Out (Fixed Wing)
Operating rules
General operating rules (Part 91)
Damage
Substantial damage
Aircraft
N180VT
NTSB investigation
NTSBATL07CA008
Reported as
Cessna 180A
People aboard
3
Fatal injuries
0
Pilot’s flight hours
11,000 total275 in this make and model22 in the last 90 days

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

(-23) When pilot touched down at Statesville airport in Statesville, north carolina the aircraft pulled left, then veered sharply to the right. The left wingtip contacted the runway. The aircraft stopped on the runway centerline balancing on the left wingtip and the left main gear before nosing over. The propeller impacted the runway.

As the FAA filed it

(-23) WHEN PILOT TOUCHED DOWN AT STATESVILLE AIRPORT IN STATESVILLE, NORTH CAROLINA THE AIRCRAFT PULLED LEFT, THEN VEERED SHARPLY TO THE RIGHT. THE LEFT WINGTIP CONTACTED THE RUNWAY. THE AIRCRAFT STOPPED ON THE RUNWAY CENTERLINE BALANCING ON THE LEFT WINGTIP AND THE LEFT MAIN GEAR BEFORE NOSING OVER. THE PROPELLER IMPACTED THE RUNWAY.

NTSB investigation

The NTSB’s investigation of this event, with its probable cause and findings. Matched to this report by N-number and date.