20111027026959A

Accident · Substantial damage

FAA accident report · Hughes 369D · Colusa, CA · October 27, 2011

Date
October 27, 2011 · 14:40 local
Place
Colusa, CA
Phase of flight
Maneuver
Operating rules
Rotorcraft external load (Part 133)
Operator
AWTL
Damage
Substantial damage
Aircraft
N61PJ
NTSB investigation
NTSBWPR12LA022
Reported as
Hughes 369D
Reported engine
Allison 250 SER 400HP
People aboard
1
Fatal injuries
0
Other injuries
0
Pilot’s certificate
Commercial pilot
Pilot’s flight hours
1,980 total330 in this make and model

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

On October 27, 2011, about 1440 pacific daylight time, a Mcdonnell Douglas MD-500D helicopter, N61PJ, was substantially damaged during an autorotation and forced landing about 6 miles west of Colusa, California, following a complete loss of engine power. The helicopter was owned and operated by pj helicopters, and was being utilized for communications cable installation and support activity for summit line construction company. The pilot received minor injuries. The work flight was operated under the provisions of title 14 code of federal regulations part 91. Visual meteorological conditions prevailed, and no flight plan was filed for the flight. According to the pilot, he had flown the helicopter a total of about 5, non-continuous, hours on the day of the accident, operating from a remote landing zone near the job site. He had just transferred two construction personnel from one cable tower to another one, and was beginning to climb and translate the helicopter clear of the tower, when he heard a noise and felt a yaw that indicated to him that the engine had ceased developing power. The helicopter began to descend rapidly. The pilot began an autorotation, maneuvered the helicopter away from the tower, and attempted to flare for ground impact. The helicopter impacted in a freshly-plowed field. The aft section of the tailboom and both landing skids were partially fracture-separated from the helicopter. The main rotor blades and flight control linkage were damaged. The fuselage sustained substantial damage. The height of the towers was reported as about 165 feet. The pilot reported a total flight experience of 1,980 hours, including 330 hours in the accident helicopter make and model. His most recent FAA second-class medical certificate was issued in January 2011, and his most recent flight review was completed in February 2011.the helicopter was manufactured and registered as a Hughes model 369D in 1977, and equipped with an allison/rolls-royce C20B series turbine engine. Operator provided information indicated that the most recent 100-hour inspection was completed on October 19, 2011, and at the time of the accident, the helicopter had accumulated a total time in service of 11,579 hours. The operator reported that the weather conditions about the time of the accident included clear skies, wind speed of 5 knots, and temperature about 27 degrees c. commercially available geographic data indicated that the accident site elevation was about 430 feet above mean sea level. 11/3/2011 an examination of the aircraft was done this day. Airframe & engine representatives and NTSB were present. The airframe components were evaluated and no conclusive evidence was noted as contributing to the event at this time. The engine and related accessories were sent to there manufacture for evaluation.11/17/2011 received e mail stating the engine was disasmbeled at the manufacturers facility with NTSB present. E mail indicates engine evaluation was inconclusive and the fuel pomp and control were removed and set to the manufacture for evaluation.

As the FAA filed it

ON OCTOBER 27, 2011, ABOUT 1440 PACIFIC DAYLIGHT TIME, A MCDONNELL DOUGLAS MD-500D HELICOPTER, N61PJ, WAS SUBSTANTIALLY DAMAGED DURING AN AUTOROTATION AND FORCED LANDING ABOUT 6 MILES WEST OF COLUSA, CALIFORNIA, FOLLOWING A COMPLETE LOSS OF ENGINE POWER. THE HELICOPTER WAS OWNED AND OPERATED BY PJ HELICOPTERS, AND WAS BEING UTILIZED FOR COMMUNICATIONS CABLE INSTALLATION AND SUPPORT ACTIVITY FOR SUMMIT LINE CONSTRUCTION COMPANY. THE PILOT RECEIVED MINOR INJURIES. THE WORK FLIGHT WAS OPERATED UNDER THE PROVISIONS OF TITLE 14 CODE OF FEDERAL REGULATIONS PART 91. VISUAL METEOROLOGICAL CONDITIONS PREVAILED, AND NO FLIGHT PLAN WAS FILED FOR THE FLIGHT. ACCORDING TO THE PILOT, HE HAD FLOWN THE HELICOPTER A TOTAL OF ABOUT 5, NON-CONTINUOUS, HOURS ON THE DAY OF THE ACCIDENT, OPERATING FROM A REMOTE LANDING ZONE NEAR THE JOB SITE. HE HAD JUST TRANSFERRED TWO CONSTRUCTION PERSONNEL FROM ONE CABLE TOWER TO ANOTHER ONE, AND WAS BEGINNING TO CLIMB AND TRANSLATE THE HELICOPTER CLEAR OF THE TOWER, WHEN HE HEARD A NOISE AND FELT A YAW THAT INDICATED TO HIM THAT THE ENGINE HAD CEASED DEVELOPING POWER. THE HELICOPTER BEGAN TO DESCEND RAPIDLY. THE PILOT BEGAN AN AUTOROTATION, MANEUVERED THE HELICOPTER AWAY FROM THE TOWER, AND ATTEMPTED TO FLARE FOR GROUND IMPACT. THE HELICOPTER IMPACTED IN A FRESHLY-PLOWED FIELD. THE AFT SECTION OF THE TAILBOOM AND BOTH LANDING SKIDS WERE PARTIALLY FRACTURE-SEPARATED FROM THE HELICOPTER. THE MAIN ROTOR BLADES AND FLIGHT CONTROL LINKAGE WERE DAMAGED. THE FUSELAGE SUSTAINED SUBSTANTIAL DAMAGE. THE HEIGHT OF THE TOWERS WAS REPORTED AS ABOUT 165 FEET.THE PILOT REPORTED A TOTAL FLIGHT EXPERIENCE OF 1,980 HOURS, INCLUDING 330 HOURS IN THE ACCIDENT HELICOPTER MAKE AND MODEL. HIS MOST RECENT FAA SECOND-CLASS MEDICAL CERTIFICATE WAS ISSUED IN JANUARY 2011, AND HIS MOST RECENT FLIGHT REVIEW WAS COMPLETED IN FEBRUARY 2011.THE HELICOPTER WAS MANUFACTURED AND REGISTERED AS A HUGHES MODEL 369D IN 1977, AND EQUIPPED WITH AN ALLISON/ROLLS-ROYCE C20B SERIES TURBINE ENGINE. OPERATOR PROVIDED INFORMATION INDICATED THAT THE MOST RECENT 100-HOUR INSPECTION WAS COMPLETED ON OCTOBER 19, 2011, AND AT THE TIME OF THE ACCIDENT, THE HELICOPTER HAD ACCUMULATED A TOTAL TIME IN SERVICE OF 11,579 HOURS. THE OPERATOR REPORTED THAT THE WEATHER CONDITIONS ABOUT THE TIME OF THE ACCIDENT INCLUDED CLEAR SKIES, WIND SPEED OF 5 KNOTS, AND TEMPERATURE ABOUT 27 DEGREES C. COMMERCIALLY AVAILABLE GEOGRAPHIC DATA INDICATED THAT THE ACCIDENT SITE ELEVATION WAS ABOUT 430 FEET ABOVE MEAN SEA LEVEL. 11/3/2011 AN EXAMINATION OF THE AIRCRAFT WAS DONE THIS DAY. AIRFRAME & ENGINE REPRESENTATIVES AND NTSB WERE PRESENT. THE AIRFRAME COMPONENTS WERE EVALUATED AND NO CONCLUSIVE EVIDENCE WAS NOTED AS CONTRIBUTING TO THE EVENT AT THIS TIME. THE ENGINE AND RELATED ACCESSORIES WERE SENT TO THERE MANUFACTURE FOR EVALUATION.11/17/2011 RECEIVED E MAIL STATING THE ENGINE WAS DISASMBELED AT THE MANUFACTURERS FACILITY WITH NTSB PRESENT. E MAIL INDICATES ENGINE EVALUATION WAS INCONCLUSIVE AND THE FUEL POMP AND CONTROL WERE REMOVED AND SET TO THE MANUFACTURE FOR EVALUATION.

NTSB investigation

The NTSB’s investigation of this event, with its probable cause and findings. Matched to this report by N-number and date.