20120720014979A

Accident · Substantial damage

FAA accident report · Hawker Beechcraft G58 · Medford, OR · July 20, 2012

Date
July 20, 2012 · 11:30 local
Place
Medford, OR
Airport
Rogue Valley International-Med
Phase of flight
Landing: Touchdown
Operating rules
General operating rules (Part 91)
Damage
Substantial damage
Aircraft
N7122T
NTSB investigation
NTSBWPR12LA324
Reported as
Hawker Beechcraft G58
Reported engine
Continental IO-550-C
People aboard
2
Fatal injuries
0
Other injuries
0
Pilot’s certificate
Private pilot
Pilot’s flight hours
860 total45 in this make and model

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

On July 20, 2012. Approximately 1130 pacific daylight time, Hawker Beechcraft G58, N7122T, was substantially damaged when it veered off the runway 32 at the Rogue valley international airport, Medford, OR. (Mfr). The aircraft struck runway distance signage and the lip of a drainage ditch. The aircraft became airborne and traveled over a taxiway before coming to rest. The pilotprivacy data omitted and his passenger were uninjured. The private pilots holds single-engine land, multi-engine land, and instrument –airplane ratings. The pilot's most recent FAA medical was issued in March 2011. The part 91 flight was conducted VMC conditions. No flight plan was filed. The mfr 1153 automated weather observation included variable winds at 4 knots; visibility 10 miles; clear skies; temperature of 24 degrees c; and an altermiter setting of 30.15 inches of mercury. Pilot total flight time was approximately 850 hours with 45 hours in the accident aircraft. The accident aircraft was manufactured in December 2011 and had approximately 50 hours total time. The pilot stated that the flight itself and the approach were normal. His final approach was made at 85 knots, with full flaps. When the aircraft touched down, it immediately became uncontrollable , swerving left and right, and finally to the right and off the runway. All three landing gear were fracture separated from their upper strut assemblies upon impact with the ditch. The aircraft came to rest upright approximately 4000 feet down runway 32, and 500 feet to the right of the runway centerline. The aircraft was recovered by a repair station located on the airport. Inspection of the aircraft took place in the maintenance facility of a local repair station on July 23 and 24, 2012. The aircraft was on jacks and displayed substantial damage to the fuselage, wings, flaps, propellers, horizontal stabilizer, and landing gear. The lower forward fuselage was crushed by impact with the ditch. The fuselage displayed torsional and compression damage at the wing spar attachment areas and "oil canning" of the skins aft of the cabin. The wings showed evidence of torsional damage in the areas between the engine nacelles and the fuselage. The flaps were damaged by impact with the ground and the departing landing gear. The damage to the propellers indicated that the engine were producing power at time of impact. The left horizontal stabilizer has a deep dent in the leading edge consistent with impact damage. Closer examination of the left main gear wheel, tire and lower strut showed unusual damage to the upper and lower anti-torque link assembly. There was no bolt, bushing, OR attaching hardware at the pivot point. The lower torque link inner clevis was bent inwards. None of the bolt holes displayed any unusual damage, OR elongation. The upper torque link was fracture separated at the upper strut attach point. In contrast, the right main landing gear wheel, tire and lower strut upper torque link was fracture separated at the upper strut attach point, just as the left upper link of the left main gear was. However, the pivot bolt and attaching hardware was in place and the clevis area of the upper and lower torque link was virtually undamaged.

As the FAA filed it

ON JULY 20, 2012. APPROXIMATELY 1130 PACIFIC DAYLIGHT TIME, HAWKER BEECHCRAFT G58, N7122T, WAS SUBSTANTIALLY DAMAGED WHEN IT VEERED OFF THE RUNWAY 32 AT THE ROGUE VALLEY INTERNATIONAL AIRPORT, MEDFORD, OR. (MFR). THE AIRCRAFT STRUCK RUNWAY DISTANCE SIGNAGE AND THE LIP OF A DRAINAGE DITCH. THE AIRCRAFT BECAME AIRBORNE AND TRAVELED OVER A TAXIWAY BEFORE COMING TO REST. THE PILOT^PRIVACY DATA OMITTED^ AND HIS PASSENGER WERE UNINJURED. THE PRIVATE PILOTS HOLDS SINGLE-ENGINE LAND, MULTI-ENGINE LAND, AND INSTRUMENT –AIRPLANE RATINGS. THE PILOT'S MOST RECENT FAA MEDICAL WAS ISSUED IN MARCH 2011. THE PART 91 FLIGHT WAS CONDUCTED VMC CONDITIONS. NO FLIGHT PLAN WAS FILED. THE MFR 1153 AUTOMATED WEATHER OBSERVATION INCLUDED VARIABLE WINDS AT 4 KNOTS; VISIBILITY 10 MILES; CLEAR SKIES; TEMPERATURE OF 24 DEGREES C; AND AN ALTERMITER SETTING OF 30.15 INCHES OF MERCURY.PILOT TOTAL FLIGHT TIME WAS APPROXIMATELY 850 HOURS WITH 45 HOURS IN THE ACCIDENT AIRCRAFT. THE ACCIDENT AIRCRAFT WAS MANUFACTURED IN DECEMBER 2011 AND HAD APPROXIMATELY 50 HOURS TOTAL TIME.THE PILOT STATED THAT THE FLIGHT ITSELF AND THE APPROACH WERE NORMAL. HIS FINAL APPROACH WAS MADE AT 85 KNOTS, WITH FULL FLAPS. WHEN THE AIRCRAFT TOUCHED DOWN, IT IMMEDIATELY BECAME UNCONTROLLABLE , SWERVING LEFT AND RIGHT, AND FINALLY TO THE RIGHT AND OFF THE RUNWAY. ALL THREE LANDING GEAR WERE FRACTURE SEPARATED FROM THEIR UPPER STRUT ASSEMBLIES UPON IMPACT WITH THE DITCH. THE AIRCRAFT CAME TO REST UPRIGHT APPROXIMATELY 4000 FEET DOWN RUNWAY 32, AND 500 FEET TO THE RIGHT OF THE RUNWAY CENTERLINE. THE AIRCRAFT WAS RECOVERED BY A REPAIR STATION LOCATED ON THE AIRPORT.INSPECTION OF THE AIRCRAFT TOOK PLACE IN THE MAINTENANCE FACILITY OF A LOCAL REPAIR STATION ON JULY 23 AND 24, 2012. THE AIRCRAFT WAS ON JACKS AND DISPLAYED SUBSTANTIAL DAMAGE TO THE FUSELAGE, WINGS, FLAPS, PROPELLERS, HORIZONTAL STABILIZER, AND LANDING GEAR. THE LOWER FORWARD FUSELAGE WAS CRUSHED BY IMPACT WITH THE DITCH. THE FUSELAGE DISPLAYED TORSIONAL AND COMPRESSION DAMAGE AT THE WING SPAR ATTACHMENT AREAS AND "OIL CANNING" OF THE SKINS AFT OF THE CABIN. THE WINGS SHOWED EVIDENCE OF TORSIONAL DAMAGE IN THE AREAS BETWEEN THE ENGINE NACELLES AND THE FUSELAGE. THE FLAPS WERE DAMAGED BY IMPACT WITH THE GROUND AND THE DEPARTING LANDING GEAR. THE DAMAGE TO THE PROPELLERS INDICATED THAT THE ENGINE WERE PRODUCING POWER AT TIME OF IMPACT. THE LEFT HORIZONTAL STABILIZER HAS A DEEP DENT IN THE LEADING EDGE CONSISTENT WITH IMPACT DAMAGE.CLOSER EXAMINATION OF THE LEFT MAIN GEAR WHEEL, TIRE AND LOWER STRUT SHOWED UNUSUAL DAMAGE TO THE UPPER AND LOWER ANTI-TORQUE LINK ASSEMBLY. THERE WAS NO BOLT, BUSHING, OR ATTACHING HARDWARE AT THE PIVOT POINT. THE LOWER TORQUE LINK INNER CLEVIS WAS BENT INWARDS. NONE OF THE BOLT HOLES DISPLAYED ANY UNUSUAL DAMAGE, OR ELONGATION. THE UPPER TORQUE LINK WAS FRACTURE SEPARATED AT THE UPPER STRUT ATTACH POINT. IN CONTRAST, THE RIGHT MAIN LANDING GEAR WHEEL, TIRE AND LOWER STRUT UPPER TORQUE LINK WAS FRACTURE SEPARATED AT THE UPPER STRUT ATTACH POINT, JUST AS THE LEFT UPPER LINK OF THE LEFT MAIN GEAR WAS. HOWEVER, THE PIVOT BOLT AND ATTACHING HARDWARE WAS IN PLACE AND THE CLEVIS AREA OF THE UPPER AND LOWER TORQUE LINK WAS VIRTUALLY UNDAMAGED.

NTSB investigation

The NTSB’s investigation of this event, with its probable cause and findings. Matched to this report by N-number and date.