20130501007349A

Accident · Substantial damage

FAA accident report · Cessna P210N · Chesterfield, MO · May 1, 2013

Date
May 1, 2013 · 07:40 local
Place
Chesterfield, MO
Airport
Spirit Of St Louis
Phase of flight
Landing: Approach
Operating rules
General operating rules (Part 91)
Damage
Substantial damage
Aircraft
N731NR
NTSB investigation
NTSBCEN13LA252
Reported as
Cessna P210N
Reported engine
Continental TSIO-520 series
People aboard
1
Fatal injuries
0
Other injuries
0
Pilot’s certificate
Commercial pilot
Pilot’s flight hours
5,854 total2,200 in this make and model15 in the last 90 days

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

On may 01, 2013 at 07:40, a Cessna P210N N731NR was involved in a gear up landing incident while attempting to land on runway 8R. The pilot was the only soul onboard the aircraft and was not injured. The aircraft was on a CFR part 91 flight in VMC conditions. The aircraft departed saint Louis Spirit of st. Louis airport (ksus), stopped for fuel at saint charles smartt airport (kset). The aircraft was fueled and departed (kset) enroute back to (ksus) prior to the gear up landing incident. The pilot stated he put the gear handle in the gear down postion, but did not verify the gear down indicator illumination prior to the gear up landing.

On may 02, 2013, a landing gear swing was performed by maintenance personnel. The landing gear hydraluic power pack circuit breaker was pushed in. The gear handle was lifted to the gear up position. The landing gear transitioned from the gear down position to the gear up position. The throttle gear up red warning light was audible and the gear up warning horn was tested by retarding the throttle. The warning horn operated and was audible. The landing gear handle was placed in the gear down position and the landing gear transitioned to the down position. This was repeated 3 times with no abnormalities noted. An emergency landing gear down procedure was performed. The landing gear circuit breaker was pulled and the landing gear handle was put to the gear down position. The landing gear transitioned towards the down position. The landing gear was then pumped down with the emergency landing gear hand pump handle. There was a green landing gear down light indication when the gear reached the down position. The landing gear circuit breaker was pushed back in. The landing gear was transitioned from down to up 2 more times with no abnormalities.

As the FAA filed it

ON MAY 01, 2013 AT 07:40, A CESSNA P210N N731NR WAS INVOLVED IN A GEAR UP LANDING INCIDENT WHILE ATTEMPTING TO LAND ON RUNWAY 8R. THE PILOT WAS THE ONLY SOUL ONBOARD THE AIRCRAFT AND WAS NOT INJURED. THE AIRCRAFT WAS ON A CFR PART 91 FLIGHT IN VMC CONDITIONS. THE AIRCRAFT DEPARTED SAINT LOUIS SPIRIT OF ST. LOUIS AIRPORT (KSUS), STOPPED FOR FUEL AT SAINT CHARLES SMARTT AIRPORT (KSET). THE AIRCRAFT WAS FUELED AND DEPARTED (KSET) ENROUTE BACK TO (KSUS) PRIOR TO THE GEAR UP LANDING INCIDENT. THE PILOT STATED HE PUT THE GEAR HANDLE IN THE GEAR DOWN POSTION, BUT DID NOT VERIFY THE GEAR DOWN INDICATOR ILLUMINATION PRIOR TO THE GEAR UP LANDING.

ON MAY 02, 2013, A LANDING GEAR SWING WAS PERFORMED BY MAINTENANCE PERSONNEL. THE LANDING GEAR HYDRALUIC POWER PACK CIRCUIT BREAKER WAS PUSHED IN. THE GEAR HANDLE WAS LIFTED TO THE GEAR UP POSITION. THE LANDING GEAR TRANSITIONED FROM THE GEAR DOWN POSITION TO THE GEAR UP POSITION. THE THROTTLE GEAR UP RED WARNING LIGHT WAS AUDIBLE AND THE GEAR UP WARNING HORN WAS TESTED BY RETARDING THE THROTTLE. THE WARNING HORN OPERATED AND WAS AUDIBLE. THE LANDING GEAR HANDLE WAS PLACED IN THE GEAR DOWN POSITION AND THE LANDING GEAR TRANSITIONED TO THE DOWN POSITION. THIS WAS REPEATED 3 TIMES WITH NO ABNORMALITIES NOTED. AN EMERGENCY LANDING GEAR DOWN PROCEDURE WAS PERFORMED. THE LANDING GEAR CIRCUIT BREAKER WAS PULLED AND THE LANDING GEAR HANDLE WAS PUT TO THE GEAR DOWN POSITION. THE LANDING GEAR TRANSITIONED TOWARDS THE DOWN POSITION. THE LANDING GEAR WAS THEN PUMPED DOWN WITH THE EMERGENCY LANDING GEAR HAND PUMP HANDLE. THERE WAS A GREEN LANDING GEAR DOWN LIGHT INDICATION WHEN THE GEAR REACHED THE DOWN POSITION. THE LANDING GEAR CIRCUIT BREAKER WAS PUSHED BACK IN. THE LANDING GEAR WAS TRANSITIONED FROM DOWN TO UP 2 MORE TIMES WITH NO ABNORMALITIES.

NTSB investigation

The NTSB’s investigation of this event, with its probable cause and findings. Matched to this report by N-number and date.