20160601005179A

Accident · Destroyed

FAA accident report · Cessna 150K · Odessa, TX · June 1, 2016

Date
June 1, 2016 · 20:33 local
Place
Odessa, TX
Phase of flight
Cruise/Level Flight
Operating rules
General operating rules (Part 91)
Damage
Destroyed
Aircraft
N5679G
NTSB investigation
NTSBCEN16LA203
Reported as
Cessna 150K
Reported engine
Lycoming O-320-E2D
People aboard
1
Fatal injuries
1
Other injuries
0
Pilot’s certificate
Commercial pilot
Pilot’s flight hours
6 in the last 90 days

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

On June 1, 2016, at approximately 2000 CDT, N5679G, a Cessna 150K departed from (mdd) midland, Texas. At approximately 2033 CDT, N5679G struck a 10 stories tall concrete silo in an industrial complex located in Odessa, Texas. The aircraft was being operated on a personal flight. No VFR flight plan was filed. The aircraft was destroyed and the sole pilot on board was fatally injured.

As the FAA filed it

ON JUNE 1, 2016, AT APPROXIMATELY 2000 CDT, N5679G, A CESSNA 150K DEPARTED FROM (MDD) MIDLAND, TEXAS. AT APPROXIMATELY 2033 CDT, N5679G STRUCK A 10 STORIES TALL CONCRETE SILO IN AN INDUSTRIAL COMPLEX LOCATED IN ODESSA, TEXAS. THE AIRCRAFT WAS BEING OPERATED ON A PERSONAL FLIGHT. NO VFR FLIGHT PLAN WAS FILED. THE AIRCRAFT WAS DESTROYED AND THE SOLE PILOT ON BOARD WAS FATALLY INJURED.

NTSB investigation

The NTSB’s investigation of this event, with its probable cause and findings. Matched to this report by N-number and date.

Other reports on N5679G · 1

Matched to the same aircraft by N-number and date.