20171107018379A

Accident · No damage

FAA accident report · Hughes 369D · Sulphur, LA · November 7, 2017

Date
November 7, 2017 · 09:30 local
Place
Sulphur, LA
Airport
Southland Field
Phase of flight
Hover/Holding
Operating rules
Rotorcraft external load (Part 133)
Operator
IZWL
Damage
No damage
Aircraft
N138WH
NTSB investigation
NTSBCEN18LA026
Reported as
Hughes 369D
People aboard
1
Fatal injuries
2
Other injuries
0
Pilot’s certificate
Commercial pilot
Pilot’s flight hours
25,090 total11,286 in this make and model26 in the last 90 days

From the FAA’s Accident/Incident Data System (AIDS), through its Aviation Safety Information Portal, as reported. The NTSB investigates accidents separately, and its record of an accident is the fuller one. The aircraft is matched to the registry by N-number and event date, checked against the reported make and model; the registry’s history has gaps, so older matches can be wrong. Compare the reported make and model.

What happened

The FAA’s narrative, in sentence case. The FAA writes it in capitals and removes private details.

Pilot departed lz located at N30°16?53.46 W093°23?12.92 at 0940 local time with a 60 feet of long line attached. He brought the aircraft into a hover at approximately 64 foot for the two linemen to attach their harness and equipment to the long line.

The aircraft then approached the planned area of operations with intentions of linemen installing one end of a crossing guard to a center power wire and the other end to an outside power wire. The power lines were approximately 100 feet above the ground, and the support structure is approximately 130 feet above the ground.

In order to access the center power line, the pilot lifted the linemen over 1 of 2 static lines that were approximately 30 feet above, running parallel, but offset to the power lines. He then lowered the linemen between the two static lines to the center power line to attach one end of the crossing guard.

After the linemen installed the center wire crossing guard, the pilot maneuvered the aircraft in the direction of the closest support structure. The pilot then noticed the linemen had used their momentum to grab onto the outside wire, which was the intended location for the other end of the crossing guard. By grabbing the outside power line at this time; the pilot saw this had caused the long line to come in contact with a static wire approximately 30-foot above the linemen.

He attempted to maneuver the aircraft to coax the linemen to let go of the outside power line which would cause the long line no longer be in contact with the static wire, but the long line snapped at the contact point before the action could be accomplished. Pilot returned to lz with approximately 30 feet of the long line attached. No other damage to aircraft.

As the FAA filed it

PILOT DEPARTED LZ LOCATED AT N30°16?53.46 W093°23?12.92 AT 0940 LOCAL TIME WITH A 60 FEET OF LONG LINE ATTACHED. HE BROUGHT THE AIRCRAFT INTO A HOVER AT APPROXIMATELY 64 FOOT FOR THE TWO LINEMEN TO ATTACH THEIR HARNESS AND EQUIPMENT TO THE LONG LINE.

THE AIRCRAFT THEN APPROACHED THE PLANNED AREA OF OPERATIONS WITH INTENTIONS OF LINEMEN INSTALLING ONE END OF A CROSSING GUARD TO A CENTER POWER WIRE AND THE OTHER END TO AN OUTSIDE POWER WIRE. THE POWER LINES WERE APPROXIMATELY 100 FEET ABOVE THE GROUND, AND THE SUPPORT STRUCTURE IS APPROXIMATELY 130 FEET ABOVE THE GROUND.

IN ORDER TO ACCESS THE CENTER POWER LINE, THE PILOT LIFTED THE LINEMEN OVER 1 OF 2 STATIC LINES THAT WERE APPROXIMATELY 30 FEET ABOVE, RUNNING PARALLEL, BUT OFFSET TO THE POWER LINES. HE THEN LOWERED THE LINEMEN BETWEEN THE TWO STATIC LINES TO THE CENTER POWER LINE TO ATTACH ONE END OF THE CROSSING GUARD.

AFTER THE LINEMEN INSTALLED THE CENTER WIRE CROSSING GUARD, THE PILOT MANEUVERED THE AIRCRAFT IN THE DIRECTION OF THE CLOSEST SUPPORT STRUCTURE. THE PILOT THEN NOTICED THE LINEMEN HAD USED THEIR MOMENTUM TO GRAB ONTO THE OUTSIDE WIRE, WHICH WAS THE INTENDED LOCATION FOR THE OTHER END OF THE CROSSING GUARD. BY GRABBING THE OUTSIDE POWER LINE AT THIS TIME; THE PILOT SAW THIS HAD CAUSED THE LONG LINE TO COME IN CONTACT WITH A STATIC WIRE APPROXIMATELY 30-FOOT ABOVE THE LINEMEN.

HE ATTEMPTED TO MANEUVER THE AIRCRAFT TO COAX THE LINEMEN TO LET GO OF THE OUTSIDE POWER LINE WHICH WOULD CAUSE THE LONG LINE NO LONGER BE IN CONTACT WITH THE STATIC WIRE, BUT THE LONG LINE SNAPPED AT THE CONTACT POINT BEFORE THE ACTION COULD BE ACCOMPLISHED. PILOT RETURNED TO LZ WITH APPROXIMATELY 30 FEET OF THE LONG LINE ATTACHED. NO OTHER DAMAGE TO AIRCRAFT.

NTSB investigation

The NTSB’s investigation of this event, with its probable cause and findings. Matched to this report by N-number and date.