- Manufacturer (registry)
- BOEING
- Model
- 737-36Q
- Registry code
- 1384409
- Registered
- 0 aircraft
- Type
- Fixed wing multi engine
- Engines
- 2 · Turbo-fan
- Seats
- 149
- Weight class
- 20,000 lb and over
- Certification
- Type certificated
Model codes come from the FAA registry’s reference file. ADs are matched to them by model name and maker.
On this page
Aircraft by year built · 8
| 1997 | 2 |
|---|---|
| 1998 | 5 |
| 2011 | 1 |
Airworthiness directives that may apply · 0
ADs whose products match this airframe model. Each AD’s applicability may narrow it by serial number, part number or configuration.
No ADs matched this model
Registered aircraft · 0
No aircraft currently registered with this model
NTSB investigations
No NTSB investigations matched to aircraft with this modelMatched through the registry by N-number, so foreign aircraft and some older cases aren’t counted.
FAA incident reports
No reports matched to aircraft of this modelMatched through the registry by N-number, so foreign aircraft and some older reports aren’t counted.
Service difficulty reports · 22
SDR CA191205007Adapter · failed(CAN) LPV APPROACH ANOMALY: GLIDE SLOPE DEVIATION POINTER MOMENTARILY SCALLOPED UP FOR A SPLIT SECOND AT FINAL APPROACH FIX ON RNAV LPV APPROACH TO RUNWAY. THIS RESULTED IN THE AUTOPILOT MOMENTARILY PITCHING THE AIRCRAFT NOSE UP FOLLOWING THE GLIDE SLOPE SCALLSDR CA140811011Clutch · undertorqued(CAN) ON FLAP EXTENSION TO 15 UNITS AND BEYOND, THE AIRCRAFT EXPERIENCES A ROLL THAT REQUIRES A TRIM INPUT. WHEN THE FLAPS ARE AT 15, 1.5 UNITS LT ROLL TRIM REQUIRED TO KEEP AIRCRAFT LEVEL. WHEN THE FLAPS ARE AT 30, 2.5 UNITS OF LT ROLL TRIM TO KEEP AIRCRAFT LSDR CA140707008Jackscrew · failed(CAN) ON THE 27TH OF JUNE 2014 THE ACFT WOULD NOT DEPLOY THE FLAPS BEYOND 27 DEGREES IN FLIGHT. ON THE GROUND THE FLAP SYS OPERATED CORRECTLY. THE AMM TROUBLESHOOTING PROCEDURE WAS FOLLOWED AND A COUPLE SCREW JACKS THAT WERE MARGINAL FOR THE TORQUE CHECK WERE
See all 22 difficulty reportsQuery with SQL
duckdb -csv -c "SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE aircraft_model_key = '73736Q' ORDER BY difficulty_date DESC"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT sdr_id, difficulty_date, n_number, aircraft_make, aircraft_model, part_name, part_condition, jasc_code, discrepancy FROM 'https://openairdocs.org/data/latest/faa_service_difficulty_report.parquet' WHERE aircraft_model_key = '73736Q' ORDER BY difficulty_date DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.