NTSB investigations, 2016
7 cases where NTSB found Scheduled maint checks.
Cases per year
| 2008 | 4 |
|---|---|
| 2009 | 6 |
| 2010 | 5 |
| 2011 | 6 |
| 2012 | 8 |
| 2013 | 8 |
| 2014 | 9 |
| 2015 | 4 |
| 2016 | 7 |
| 2017 | 6 |
| 2018 | 4 |
| 2020 | 3 |
| 2021 | 2 |
| 2022 | 3 |
| 2023 | 1 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE year(c.\"eventDate\") = 2016
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '01010520'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE year(c."eventDate") = 2016 AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '01010520')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN16LA336Accident · No injuriesLimited investigationFinal reportBeech E-55 · Wichita Falls, TXThe failure of the landing gear assembly snap ring, which prevented the pilot from being able to extend the landing gear and resulted in a gear-up landing. Also causal was the lack of the assembly's overhaul in accordance with the airplane maintenance manual.NTSB CEN16LA300Accident · Serious injuriesLimited investigationFinal reportWings AN Things Avid Flyer · Bluffton, INThe loss of roll control during climb for reasons that could not be determined because postaccident examination of the airframe revealed no evidence of mechanical malfunctions or failures that would have precluded normal operation.NTSB WPR16LA134Accident · No injuriesLimited investigationFinal reportBell OH 58A · Brawley, CAThe engine's degraded performance due to excessive wear of the engine bleed valve, which prevented it from closing during the accident flight. Contributing to the accident was the operator's failure to overhaul the bleed valve within the…NTSB ERA16LA145Accident · No injuriesLimited investigationFinal reportCessna 175B · Hurley, MSThe mechanic's failure to identify and remove a plastic sheath covering a portion of the mixture control cable during an annual inspection, which prevented the proper securing of the mixture control cable and full travel of the control at the carburetor and…NTSB WPR16LA080Accident · Serious injuriesLimited investigationFinal reportNorth Wing Apache · Queen Creek, AZA loss of control for reasons that could not be determined because postaccident examination did not reveal any anomalies that would have precluded normal operation. Contributing to the accident was the noncertificated pilot’s lack of experience in the…NTSB WPR16FA072Accident · 1 fatalField investigationFinal reportBell 206B · Honolulu, HIThe in-flight failure of the engine-to-transmission drive shaft due to improper maintenance, which resulted in low main rotor rpm and a subsequent hard landing to water.NTSB DCA16LA096Accident · No injuriesLimited investigationFinal reportLockheed 382G · Iliamna, AKThe fatigue failure of the forward pressure bulkhead canted web that originated from stress corrosion cracking areas. Contributing to the failure were inspection procedures and intervals inadequate to identify the crack.