NTSB investigations, 2015
7 cases where NTSB found Tail rotor drive system.
Cases per year
| 2008 | 5 |
|---|---|
| 2009 | 1 |
| 2011 | 4 |
| 2012 | 7 |
| 2013 | 3 |
| 2014 | 1 |
| 2015 | 7 |
| 2016 | 1 |
| 2017 | 1 |
| 2018 | 1 |
| 2019 | 2 |
| 2020 | 1 |
| 2021 | 4 |
| 2022 | 3 |
| 2024 | 5 |
Where
Latest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE year(c.\"eventDate\") = 2015
AND c.\"mKey\" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f.\"findingCode\", '010465'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1 WHERE year(c."eventDate") = 2015 AND c."mKey" IN (SELECT f.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_findings.parquet' f WHERE starts_with(f."findingCode", '010465')) ORDER BY c."eventDate" DESC, c."ntsbNumber" DESC
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB CEN16LA047Accident · No injuriesLimited investigationFinal reportEurocopter EC120B · Goshen, INThe failure of the Thomas coupling at the interface with the main gear box tail rotor output shaft, which resulted in the helicopter's loss of tail rotor control.NTSB CEN16LA027Accident · No injuriesLimited investigationFinal reportBell 407 · San Antonio, TXThe failure of the No. 3 tail rotor adapter and shaft due to a loss of torque on the retaining nut. Contributing to the accident was the lack of a requirement to inspect the tail rotor assembly for security in the helicopter manufacturer's maintenance manual…NTSB ERA16LA015Accident · No injuriesLimited investigationFinal reportBell 206L 3 · Dickinson, ALThe improper installation by company maintenance personnel of the securing hardware of a tail rotor driveshaft section, which resulted in that section of tail rotor driveshaft disconnecting and a complete loss of tail rotor thrust.NTSB ANC15LA073Accident · No injuriesLimited investigationFinal reportRobinson Helicopter R44 · Fort Glenn, AKThe separation of the tail rotor gearbox from the tailboom attachment point due to overstress loads imposed by a tail rotor blade imbalance as the result of impact with an undetermined object during low-level flight operations.NTSB CEN15LA412Accident · Minor injuriesLimited investigationFinal reportGuisinger Gary G Baby Belle · Stuart, IAThe failure of the tail rotor driveshaft for reasons that could not be determined due to the mechanically and thermally deformed fracture surface.NTSB CEN15LA379Accident · Minor injuriesLimited investigationFinal reportRobinson Helicopter R44 II · Ketchum, OKThe separation of the tail rotor gearbox from the tailboom aft bulkhead due to overstress loads imposed by a blade imbalance from an in-flight impact with an undetermined object.NTSB ERA15LA218Accident · No injuriesLimited investigationFinal reportBell 206L-3 · Kearny, NJThe deliberate concealment and reuse of an unairworthy tail rotor driveshaft by unknown personnel, which resulted in an overstress separation at a bonded flange adapter as a result of driveshaft imbalance.