ANC04FA092

The private pilot, with two passengers, was flying one of two wheel-equipped airplanes en route to a remote beach site. The route of flight was over ocean waters, flanked by steep vertical cliffs to the waters edge. After passing over the last suitable landing site, an airport about 12 miles north, the accident pilot reported to the pilot of the second airplane that he had a severe engine oil leak, and was retuning to the airport. The pilot reported that once the oil stopped leaking, about 3 miles from the airport, the engine began to vibrate so violently that he thought the engine was going to be torn from its mounts, and he shut the engine off. He said he turned the airplane in an attempt to glide to the nearest beach, but he was unable to reach the beach, and was forced to ditch the airplane about 300 yards from shore. When the airplane's main landing gear wheels touched the water, it nosed over abruptly, and the cabin rapidly filled with water. The pilot said he struggled to free himself and the passengers from their seat belts, while upside-down, and submerged in cold ocean water. Once he was free, he swam to the rear of the airplane, kicked out one of the aft windows, swam to the surface, and summoned help. Rescue personnel discovered the two passengers still restrained within their seats. A postaccident examination of the engine revealed that a hex head plug at the front of the engine, in front of the propeller governor idler gear shaft, was missing, allowing engine oil under pressure to flow overboard. Additionally, the propeller governor idler gear shaft setscrew was loose, and the idler gear shaft was missing. There was no evidence that the hex head plug had been safety wired as required at the last engine overhaul, 299.6 service hours prior to the accident. According to the owner/pilot, he and a friend assembled the overhauled components of the accident engine in the pilot/owner's home-based shop. He said that that all work was accomplished in accordance with Textron Lycoming technical data. The pilot/owner did not possess an aviation mechanic's certificate. The pilot/owner reported that his friend, who owned and operated an aircraft maintenance facility, was supervising his work during the engine overhaul. A review of the engine logbooks revealed that the overhaul was certified by the pilot/owners friend, who also possessed inspector authority (IA).

History of flight

On August 15, 2004, about 1323 Alaska daylight time, a tundra tire-equipped Maule M-5-235C airplane, N6194M, sustained substantial damage during an emergency landing and ditching in the ocean waters of Resurrection Bay, about 1 mile southwest of Seward, Alaska. The airplane was being operated as a visual flight rules (VFR) cross-country personal flight under Title 14, CFR Part 91, when the accident occurred. Of the three people aboard, the private pilot sustained minor injuries, and the two passengers sustained fatal injuries. Visual meteorological conditions prevailed, and no flight plan was filed. The accident airplane was one of two airplanes operating as a flight of two, en route to a remote beach site located about 24 miles southeast of Seward. Both of the airplanes departed from the Birchwood Airport, Chugiak, Alaska, about 1230.

During an interview with the National Transportation Safety Board (NTSB) investigator-in-charge (IIC) on August 24, the accident pilot reported that the flight from Birchwood to Seward was uneventful. He said that after passing over the town of Seward, both airplanes flew southbound over Resurrection Bay, en route to Johnstone Bay, their destination. He added that the shoreline along Resurrection Bay consists of rocky, vertical cliffs, and that roughly 12 miles south of the Seward airport, he noticed a heavy accumulation of bubbling black oil coming out of the engine oil dipstick access door, located just in front of the pilot's windscreen. He said that immediately after noticing the oil leak, he contacted the pilot in the second airplane and said, in part: "I've got an oil leak and I need to get back to Seward." He reported that the oil leak was so bad that he was unable to see out of the airplane's windscreen due to a heavy accumulation of engine oil, and that the pilot of the second airplane had to provide him with compass headings to Seward. The pilot said that while flying alongside the second airplane, his airplane continued to trail smoke and oil, but the smoke and oil stopped when the airplane was about 3 miles from the Seward Airport, and then the engine began to vibrate so violently that he was afraid that the engine was going to be torn from its mounts, and he shut the engine off. He said he turned the airplane to the right in an attempt to glide to the nearest beach, but he was unable to reach the beach, and when the airplane's main wheels touched the water, it nosed over abruptly, and the cabin rapidly filled with water. The pilot reported that he struggled to free himself and his passengers from the seat belts while upside-down and submerged in cold ocean water. Once he was free, he swam to the rear of the airplane, kicked out one of the aft windows, swam to the surface, and summoned help.

About 1325, the Alaska State Trooper's dispatch center received several 911 telephone calls from witnesses who reported the accident. The accident site was located about 300 yards off shore of an area known as Fourth of July Creek. An off-duty Alaska State Trooper who was fishing from a boat close to the accident site was one of the first rescuers to arrive on scene. When the trooper arrived at the scene, he found the hypothermic, semiconscious pilot clinging to the partially submerged wreckage. Additional search and rescue personnel from the Alaska State Trooper's Tactical Dive Unit (TDU), U.S. Coast Guard, and Seward Fire Department, responded to the scene and discovered the two passengers inside, still restrained within their seats.

On August 15, the NTSB IIC, and an airworthiness inspector from the Federal Aviation Administration Anchorage Flight Standards District Office, traveled to the accident site. After the airplane wreckage was recovered from the waters of Resurrection Bay, a postaccident wreckage examination of the airplane's Lycoming six cylinder O-540-J1A5D engine revealed that the three-quarter inch hex head plug at the front of the engine, which retains the propeller governor idler gear shaft, was not present. The three-quarter inch hex head plug is not visible when the propeller and starter ring gear is installed. The accident airplane's engine assembly was subsequently removed, and shipped to Anchorage, Alaska, for further examination.

Personnel information

The pilot held a private pilot certificate with airplane single-engine land and sea ratings. His most recent third-class medical certificate was issued on May 19, 2003, and contained the limitation that night flight operations were not permitted.

According to the NTSB Pilot/Operator Aircraft Accident/Incident Report (NTSB Form 6120.1) submitted by the pilot, his total aeronautical experience consists of about 1,600 hours, of which 315 were accrued in the accident airplane make and model. In the preceding 90 and 30 days prior to the accident, the report lists a total of 70 and 25 hours, respectively.

Aircraft information

The airplane was equipped with a recording hour meter. According to the owner/pilot, the recording hour meter matched the airplane's total flight hours. At the accident scene, the hour meter was indicating 2,042.6. Examination of the airplane's maintenance records revealed that the last inspection (annual) was conducted August 11, 2003, 99.6 service hours prior to the accident.

The airplane was equipped with a Lycoming, O-540-J1A5D engine. Examination of the airplane's engine records revealed that the engine had been overhauled on July 2, 2001, 299.6 hours prior to the accident. According to the owner/pilot, he and a friend assembled the overhauled components of the accident engine in the pilot/owner's home-based shop. He said that that all work was accomplished in accordance with Textron Lycoming technical data. He added that his friend owned and operated an aircraft maintenance facility located at the Birchwood Airport, the same airport where the accident airplane was based, and that all of his work was done while being supervised by his friend. At the time of the engine overhaul, the owner/pilot was working towards an aviation mechanic's certificate by attending a local aviation college.

According to the engine records, the engine overhaul was certified by the pilot/owner's friend, a licensed airframe and power plant mechanic, who also possessed inspector authority (IA).

Meteorological information

The pilot reported that at the time of the accident, weather condition consisted of: Wind, light and variable; visibility, 50 miles; clouds and sky condition, clear; temperature, 75 degrees.

Communications

During the emergency, the pilot transmitted a radio call for help to the pilot of the second airplane on the common traffic advisory frequency (CTAF) of 122.9 MHz. CTAF communications are not recorded in the Seward area.

Wreckage and impact information

The airplane was ditched and partially sank, about 300 yards off shore. The wreckage was recovered prior to the arrival of the NTSB IIC, on the afternoon of August 15, 2004, by hoisting the airplane vertically out of the water by a cable attached to the propeller assembly. The wreckage was examined at a dry-dock facility, located adjacent to the accident site, on August 15 and 16.

All of the airplane's major components were found at the main wreckage area. The left wing exhibited minor hydraulic crushing on the underside of the leading edge, about 12 inches outboard from the wing root. The underside of the wing had upward crushing. Both left wing lift struts were bent and broken.

The right stabilizer also had minor wrinkling, and slight downward crushing of the upper surface. The left stabilizer displayed minor damage to the outboard end.

The flight control surfaces remained connected to their respective attach points, and flight control system cable continuity was established throughout