CEN18LA307

The pilot was landing the experimental, amateur-built, tailwheel-equipped airplane on a dry runway. During the rollout, the airplane veered to the left when the tailwheel was lowered to the runway. Both wingtips contacted the runway surface; the airplane ground looped and exited the runway, which resulted in substantial damage to the forward section of the fuselage. Postaccident examination of the airplane revealed that the right steering cable chain was broken and hanging from the tailwheel. It could not be determined if the cable broke before or during the accident sequence.

On August 02, 2018, about 1900 eastern daylight time, a Gerald Dan Coppock BABE-E homebuilt experimental airplane, N142NV, registered to the pilot/builder, sustained substantial damage during a runway excursion following a loss of directional control while landing at the Delta County Airport (ESC), Escanaba, Michigan. The pilot was not injured. Visual meteorological conditions prevailed and a flight plan was not filed. The local personal flight was being conducted under the provisions of Title 14 Federal Code of Regulations Part 91. The flight originated from ESC about 1830. According to the pilot, he was landing on runway 01 at ESC and the airplane touched down normally. During the rollout, the airplane veered to the left once the tailwheel contacted the runway. Both wingtips contacted the runway surface and the airplane ground-looped. The forward section of the fuselage was buckled upward and substantially damaged. The airplane came to rest, nose down and the pilot exited the airplane. According to ESC METAR weather, reported winds about the time of the accident were 330 at 5 knots. Inspection of the airplane after the accident revealed that the right steering cable chain was broken and hanging from the tailwheel. It could not be determined if the cable break was caused prior to or during the accident sequence. NTSB Form 6120 was not received from the pilot for additional information.