CEN22LA055

The noncertificated pilot reported that the engine lost power “abruptly” about 150-200 ft above ground level after takeoff. He executed a forced landing to a pasture off the end of the runway. During the landing sequence the airplane’s landing gear caught on the top wire strands of a barbed wire fence and the wings impacted two small trees. The airplane sustained substantial damage to both wings and the fuselage. A postaccident examination by Federal Aviation Administration inspectors did not reveal any preaccident malfunctions or failures with the airframe or the engine that would have precluded normal operation. The noncertificated pilot reported that it was possible that the two-stroke engine seized, and that better maintenance of the automatic oiling system could have prevented the engine failure. The noncertificated pilot reported he had completed a condition inspection of the airplane about 9 months before the accident; however, he did not hold a mechanic or a repairman certificate applicable to the accident airplane and, therefore, was not authorized to conduct that inspection. The most recent condition inspection conducted by an authorized mechanic was completed in July 2016. Additionally, he did not hold a private or light sport pilot certificate. He was issued a student pilot certificate; however, associated solo endorsements had expired. The pilot was not certificated to operate the accident airplane.