CEN24LA242

The pilot reported that he was conducting a post-maintenance flight after some adjustments were made to the multi-engine airplane’s avionics equipment. The pilot flew an instrument landing system (ILS) approach and made a full-stop landing on the runway. After a brief wait, as instructed by the air traffic controller, the pilot began his next takeoff. Shortly after rotation, the airplane rolled to the left, and the pilot was unable to regain airplane control using aileron and rudder inputs. The airplane settled into the ground in a near-level attitude. During the impact sequence, the nose landing gear and right main landing gear collapsed, which resulted in substantial damage to the right wing and fuselage. Examination of the airplane revealed that the left engine’s rubber accordion coupling in the induction system between the throttle body and the engine was split. There was no impact damage in the area of the engine and this split was not due to the damage during the accident sequence. No other anomaly was discovered that would have prevented normal operation. The airplane’s most recent annual inspection was conducted about 7 months before the accident, and the airplane had accumulated about 60 hours since the inspection. Review of maintenance information did not reveal a recommended replacement interval for the coupling. Based on the evidence, the split in the induction coupling allowed a large induction leak that likely resulted in a total loss of engine power on the left engine due to the lean fuel/air mixture that resulted. The loss of power on the left engine resulted in the uncommanded left yaw/roll due to asymmetrical thrust and increased drag, from which the pilot had insufficient altitude to recover control of the airplane.

On June 27, 2024, at 1145 central daylight time, a Cessna 310R airplane, N5080J, sustained substantial damage when it was involved in an accident near Duluth, Minnesota. The pilot was not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight. The pilot reported that the flight was to conduct testing of adjustments made to the airplane’s avionics equipment. He departed the Richard I. Bong Airport (SUW), Superior, Wisconsin, and flew the airplane to Duluth International Airport (DLH), Duluth, Minnesota. He executed the runway 9 ILS approach and stopped on the runway, as instructed by air traffic control. After a brief wait on the runway, he received takeoff clearance to return to SUW. During the takeoff, seconds after rotation, the airplane rolled to the left, and the pilot was unable to regain airplane control using aileron and rudder inputs. The airplane settled into the ground in a near-level attitude north of runway 9. During the impact sequence, the nose landing gear and right main landing gear collapsed, which resulted in substantial damage to the right wing and fuselage. Examination of the airplane after the accident revealed that the rubber accordion coupling in the induction system on the left engine between the engine and fuel control was split. The printed information on the coupling indicated that it was part number 641551 and was manufactured in the second quarter of 2014. Review of maintenance information did not reveal a recommended replacement interval. Review of the airplane’s maintenance records indicated that the left engine was overhauled and installed on the airplane on July 1, 2015. No maintenance entry indicating replacement of the coupling was found. No other anomaly was discovered that would have prevented normal operation.