WPR18WA017

NTSB accident investigation · Cessna 210 · Albany, Australia · October 24, 2017

Accident · FatalForeign investigation
Date
October 24, 2017
Place
Albany, Australia
Injuries
1 fatal
Damage
Destroyed
Phase of flight
Takeoff
Aircraft
VH-DBUCessna 210
Defining event
Takeoff: Collision during takeoff/land
NTSB office
Western Pacific Region
Lead agency
Other
Case key
96250

From the NTSB’s public API. By law, NTSB reports can’t be used as evidence in lawsuits over the accident.

On this page

Sequence of events

The events NTSB coded, in order, by phase of flight. The defining event is the one that best describes the accident. Under each, the cases with the same event anywhere in their sequence.

Factual narrative

On October 24, 2017, at 1115 local time, a Cessna 210B, VH-DBU, was destroyed when it impacted the ground following a collision with terrain near Albany, Western Australia. The airplane was operated under the pertinent regulations of the Australian Government. The pilot, the sole occupant, was fatally injured. The investigation is under the jurisdiction of the Australian Government. This report is for information purposes only and contains only information released by the Government of Australia. Further information pertaining to this accident may be obtained from: Australian Transport Safety Bureau 62 Northbourne Avenue Canberra ACT 2601 Tel: 1-800-011-034 email: ATSBInternationalReporting@atsb.gov.au

Aircraft

Registration
VH-DBU
Reported as
Cessna 210 (B)
Category
Airplane
Damage
Destroyed
Fire
On-Ground