NTSB investigations: Bell 222U
11 cases on aircraft the registry lists as Bell 222U. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases per year
| 1983 | 1 |
|---|---|
| 1985 | 1 |
| 1986 | 1 |
| 1987 | 1 |
| 2000 | 1 |
| 2002 | 1 |
| 2004 | 2 |
| 2010 | 3 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('1182140'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('1182140'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB OPS10IA538Incident · No injuriesIncident investigationFinal reportBoeing 737-7H4 · Los Angeles, CAFailure of the air traffic controller to exercise positive control of the situation by issuing clear and timely control instructions to the helicopter pilot. Contributing to the incident was delay by the helicopter pilot in responding to instructions issued…NTSB CEN10FA291Accident · 2 fatalField investigationFinal reportBell 222 · Midlothian, TXThe fracture of a swashplate drive pin as a result of hydrogen embrittlement due to an unknown source, which resulted in an in-flight breakup of the main rotor system during cruise flight.NTSB WPR10LA200Accident · No injuriesLimited investigationFinal reportBell 222U · Santa Maria, CAThe pilot's inadequate preflight inspection to ensure that all tie-down straps were removed prior to flight. Contributing to the accident was the pilot's improper management of sleep opportunities during the preceding rest period, which likely contributed to…NTSB LAX04CA332Accident · No injuriesData collectionFinal reportBell 222U · Santa Rosa, CAthe pilot-in-command's (examinee's) incorrect collective control response to a simulated power loss of the number 1 engine.NTSB SEA04LA145Accident · No injuriesLimited investigationFinal reportBell 222U · Louie Lake, IDThe failure of the pilot to maintain rotor rpm and his inadequate recovery from a bounced landing. Factors contributing to the accident included the tailwind condition and the tree.NTSB LAX02FA276Accident · 3 fatalField investigationFinal reportBell 222U · Nipton, CAThe main rotor blade separation while maneuvering for unknown reasons. A factor was the dark night condition.NTSB CHI00FA111Accident · No injuriesField investigationFinal reportBell 222U · St. Paul, MNThe loss of clamp-up force between the transmission case and the pylon mounted actuator support assembly which resulted in fatigue failure of the threaded studs and dowel pins, the failure of the flight control system, helicopter control not being possible…NTSB MIA87IA141Incident · No injuriesIncident investigationFinal reportBell 222U · Oxford, MSThe pilot executed a precautionary landing after hearing a loud bang and experiencing a loss of the number 1 engine. Post accident examination revealed that the power turbine wheel blades had failed, and the wheel parts logjammed and penetrated the engine…NTSB LAX86LA098Accident · Minor injuriesLimited investigationFinal reportBell 222UT · La Habra, CAOn January 26, 1986 a Bell 222UT collided with a 3/8 inch support cable. The pilot saw the lower of two of the three support cables about 75 feet AGL as he was transitioning to forward flight from a vertical max performance t/o. the pilot applied aft cyclic…NTSB FTW86MA018Accident · 2 fatalMajor investigationFinal reportBell 222UT · East CameronThree pax rprtd that just prior to reaching the helipad, the helicopter's forward movement stopped and the helicopter wobbled or yawed from side to side. The pax's rprted that the pilot appeared to be trying to gain altitude and go forward when they heard a…NTSB FTW84LA090Accident · No injuriesLimited investigationFinal reportBell 222U · Albuquerque, NMThe helicopter was parked on the ramp, facing east. When the plt called the tower for clearance, he requested a west departure. The plt received a clearance & was advised of traffic on the west ramp (behind the helicopter) & was instructed not to overfly the…