NTSB investigations: Bellanca 7ECA, MD
6 cases on aircraft the registry lists as Bellanca 7ECA. Aircraft are matched to the registry by N-number and event date, checked against the reported serial number, make and model, so older matches can be wrong.
Cases per year
| 1976 | 1 |
|---|---|
| 1977 | 1 |
| 1982 | 1 |
| 1985 | 1 |
| 1997 | 1 |
| 2001 | 1 |
Where
Open the mapLatest cases
Query with SQL
duckdb -csv -c "SELECT c.\"ntsbNumber\", c.\"eventDate\", c.\"eventType\", c.\"eventCity\", c.\"eventStateOrRegion\", a.n_number, a.\"aircraftMake\", a.\"aircraftModel\", c.\"highestInjuryLevel\", c.\"totalFatal\", c.\"completionStatus\", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c.\"mKey\" AND a.position = 1
WHERE c.\"eventStateOrRegion\" = 'MD' AND c.\"eventCountry\" = 'USA'
AND c.\"mKey\" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('1220460'))
ORDER BY c.\"eventDate\" DESC, c.\"ntsbNumber\" DESC"Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT c."ntsbNumber", c."eventDate", c."eventType", c."eventCity", c."eventStateOrRegion", a.n_number, a."aircraftMake", a."aircraftModel", c."highestInjuryLevel", c."totalFatal", c."completionStatus", c.report_url
FROM 'https://openairdocs.org/data/latest/ntsb_case_detail.parquet' c LEFT JOIN 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' a ON a.case_mkey = c."mKey" AND a.position = 1
WHERE c."eventStateOrRegion" = 'MD' AND c."eventCountry" = 'USA'
AND c."mKey" IN (SELECT x.case_mkey FROM 'https://openairdocs.org/data/latest/ntsb_aircrafts.parquet' x WHERE x.aircraft_model_code IN ('1220460'))
ORDER BY c."eventDate" DESC, c."ntsbNumber" DESCRun it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
NTSB IAD01LA062Accident · No injuriesLimited investigationFinal reportEaa Chapter 40 Cubby Sport Trainer · Elkton, MDThe Cubby pilot's inadequate visual lookout for the Bellanca on the runway, prior to landing.NTSB NYC97LA157Accident · No injuriesLimited investigationFinal reportChampion 7ECA · Easton, MDan inadequate weld repair, which resulted in insufficient structural strength of the left main gear.NTSB BFO85LA020Accident · No injuriesLimited investigationFinal reportBellanca 7-ECA Citabria · Annapolis, MDDuring final apch to rwy 30, a go-around was executed due to a shift in wind direction, according to the plt. He subsequently entered the pattern for rwy 12, made a full stop lndg with no difficulties, and took off again for a planned touch and go on the next…NTSB ATL82DA178Accident · No injuriesFinal reportBellanca 7ECA · Ft. Meade, MDThe pilot reported that the carburetor heat operated during an engine run-up before takeoff, and that he used the carburetor heat during each landing. During a touch-and-go, he lifted off at 65 KTS, but the plane settled and would not climb out of ground…NTSB IAD77FIG11Accident · Serious injuriesClosedBellanca 7ECA · Galena, MDNTSB IAD76FIG11Accident · No injuriesClosedBellanca 7ECA · Fort Meade, MD